Dimplex LAS 22TT Instrukcja instalacji i obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Pompa ciepła Dimplex LAS 22TT. Dimplex LAS 22TT 20 stron. Air-to-water heat pumps for swimming pool heating (outdoor installation)
Drukuj stronę
3
Scope of Delivery
3.1 Basic Device
The heat pump is of compact design and is supplied complete
with the components listed below.
R407C is used as refrigerant.
1)
Evaporator
2)
Switch box
3)
Ventilator
4)
Filter dryer
5)
Compressor
6)
Titanium heat exchanger
(Illustration: Front casing removed)
3.2 Switch Box
The switch box is located in the heat pump and can be accessed
by removing the covering panel assembly (the panel assembly
screw-holes are sealed by cover caps).
The switch box contains the supply connection terminals, as well
as the power contactors, the soft starter unit and the remote con-
trol connection terminals.
Heat pump control is via the remote control provided in the scope
of supply (see also Section 8).
www.dimplex.de
4
Transport
ATTENTION!
When transporting the heat pump, ensure that it is not tilted more than
45° (in any direction).
Use the wooden pallet for transporting the heat pump to its final
installation location. Either a lifting truck or 3/4" pipes fed through
the holes in the base plate or frame can be used for transporting
the heat pump.
ATTENTION!
The heat pump and transport pallet are only joined by the packing film.
To avoid injuring your hands, ensure that the pipes cannot slip
when being used to lift the pump.
When inserting the pipes through the frame, ensure that the com-
ponents are not damaged (especially the plastic condensate tray
and/or the drain stubs).
4
E-3