Dimplex Optiflame Electric Fireplace Praktyczny podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Praktyczny podręcznik użytkownika dla Kuchenka Dimplex Optiflame Electric Fireplace. Dimplex Optiflame Electric Fireplace 11 stron. Inset fire
Również dla Dimplex Optiflame Electric Fireplace: Podręcznik użytkownika (13 strony), Instrukcja instalacji (5 strony), Instrukcja obsługi (4 strony)
Drukuj stronę
OPERATION
FIGURE 1
FIGURE 2
REMOTE CONTROL
The Optiflame fireplace is supplied with a radio
frequency remote control (all models except
BF36E). This remote control has a range of
approximately 50ft. (15.25m), it does not have to
be pointed at the fireplace and can pass through
most obstacles (including walls). It is supplied
with one of 243 independent frequencies to prevent
interference with other units. The frequency
designation is indicated on the back of the
transmitter (FIGURE 1).
A. Remote Control Initialization
This procedure is required every time there is a
loss of power to the remote control in the fireplace
(i.e. power failure, breaker tripped, main power
switch is turned off)
1. Ensure that power is supplied through main
service panel.
2. Access the manual controls, (remove glass
doors if applicable) pull right hand edge of
right hand steel curtain towards the center of
unit. (FIGURE 2)
3. Locate manual controls refer to FIGURE 3.
4. Activate main power switch, red indicator light
1 will flash.
5. Press ON button located on the remote control
transmitter (FIGURE 1). This will synchronize
the remote control transmitter and receiver.
B. Remote Control Usage
The remote control operates the fireplace levels
sequentially. The level is increased every time the
ON button on the transmitter is pressed. The
fireplace can be turned off at any point by pressing
the OFF button on the remote control transmitter.
2