Dimplex LPC Series Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Grzałka elektryczna Dimplex LPC Series. Dimplex LPC Series 12 stron. Smart baseboard
Również dla Dimplex LPC Series: Instrukcja instalacji i obsługi (3 strony), Instrukcje instalacji (3 strony), Instrukcje instalacji (4 strony), Instrukcje instalacji (2 strony), Instrukcje instalacji (3 strony), Instrukcje instalacji (3 strony), Instrukcje instalacji (3 strony), Podręcznik (4 strony)

Drukuj stronę

Figure 1

Min.

1.5" (3.8 cm)

Min.

1.5" (3.8 cm)

Min.

6" (15.3 cm)

Min.

1.5" (3.8cm)

Min.

3" (7.6 cm)

Figure 2

A - Setting/Temperature Display

B - Economy Setting Icon

C - Set Back Temperature Setting

D - Comfort Setting Icon

E - Synchronized Icon

B. Economy Setting

The Economy Setting can be used to change the Setpoint

Temperature for a variable period of time. By pressing the V

the Economy Setting will be enabled - signified by the icon

flashing. After the Set Back Temperature has been set, the

icon will become solid after three seconds and the Set Back

Temperature will be enabled.

To return back to the Comfort Setting press the V button and

the

icon will disappear and the

C. Set Back Temperature Setting

The Set Back Temperature Setting is used during periods

when the Economy setting feature is active. This temperature

adjustment can be set by pressing the V followed by the

+ or -.

D. Comfort Setting

The Comfort Setting icon will be displayed when the heater

is in normal operation based on the Setpoint Temperature for

the room.

NOTE: Either the

dependent on the setting being used.

E. Synchronized Icon

The LPC features CONNEX

with Dimplex single and multi-zone CONNEX

to provide simple whole home connectivity and comfort.

CONNEX

controllers are available to control one or multiple

LPC's or PCH's within a 50' (15 m) radius. In order for the

controller to have this function the LPC and the controller will

need to be synchronized. To do this:

1. On the LPC heater press and hold the V button for 3

Min.

See Item 4 & 5

for Dimension

Min.

3" (7.6 cm)

F - Lock Icon

G - Decrease Button

H - Increase Button

I - Menu Button

icon will appear.

icon will always be visible,

, a wireless technology that works

seconds, both the

2. Press the - , + and then V, on the LPC heater.

Min.

3" (7.6 cm)

3. Within 10 seconds press any button once on the CONNEX

controller.

NOTE: There is a 3 second delay between pressing the last

button on the CONNEX

NOTE: To desynchronize a LPC heater from the

synchronized CONNEX

Nothing needs to be done to the CONNEX

Dimplex single and multi-zone CONNEX

separately and are available for purchase from your authorized

Dimplex dealer.

To find your local Dimplex dealer, visit www.dimplex.com.

F. Lock Icon

The Smart Baseboard has a Button Lock feature, to prevent

settings from accidentally being changed.

1. Press and hold the V for 3 seconds. Both the

Icons will begin to flash.

2. To Enable: Within 5 seconds press +, then -, then +, then

-. The

To Disable: Within 5 seconds press -, then +, then -, then

+. The

NOTE: The LPC can be locked in either the Comfort or

Economy Setting. Ensure that the desired icons are present

when locking is complete.

Maintenance

CAUTION: Before removing the front cover for cleaning,

make certain the power has been turned off at the circuit

breaker panel, to prevent electric shock.

CAUTION: To avoid burns, allow adequate time for the

element and body casing to cool before attempting to work

on the smart baseboard.

The LPC series contain no moving parts. Since the appliance

contains no moving parts, little maintenance is required

beyond vacuum cleaning. It is however essential that the

smart baseboard is not operated with an accumulation of dust

or dirt on the element, as this can cause a build up of heat

and eventual damage. For this reason the smart baseboard

must be inspected regularly, depending upon conditions and

at least at yearly intervals. Once cleaning is complete replace

the front cover and restore power.

! NOTE: The user can perform cleaning ONLY. All other

servicing should be performed by qualified service personnel.

Warranty

controllers

The Manufacturer warrants the Smart Baseboard and

components of the enclosed product against any defect in

material or workmanship for a period of one year from the

date of purchase, with the exception of the elements which are

warranted to be free from defect in material and workmanship

for ten years. In full satisfaction of any claims under this

Warranty the Manufacturer will repair or replace without

charge, in its factory or in the field as it alone may decide, any

and

icons will begin to flash.

controller and the LPC heater.

controller, on the LPC heater:

1. Press and hold the V for 3 seconds.

2. Press the V, + and then -.

icon will now be visible.

icon will not be visible.

controller.

controllers are sold

and