Aeon Labs D/W Sensor Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria Aeon Labs D/W Sensor. Aeon Labs D/W Sensor 20 stron. Door/window sensor

Troubleshooting: If the Aeon Labs D/W Sensor was not

included into any Z-Wave network, pressing the security switch

will illuminate the LED on the front of the Aeon Labs D/W

Sensor solid red for 5 seconds. If the Aeon Labs D/W Sensor

was successfully included to a Z-Wave network, the LED will

blink instead of staying solid.

3. Wake the Aeon Labs D/W Sensor for 10

Minutes

The Aeon Labs D/W Sensor can be made to stay awake for 10

minutes by any of the following methods below. Once the

Aeon Labs D/W Sensor has been woken, the LED will blink

every few seconds indicating that it is now awake and ready to

receive Z-Wave network information and instructions.

3.1 Firmly tap the security switch on the back of the Aeon Labs

D/W Sensor 3 times in quick succession.

3.2 Successfully include the Aeon Labs D/W Sensor into any

Z-Wave network.