Dimplex DCPF40CH Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Dimplex DCPF40CH. Dimplex DCPF40CH 13 stron. 40cm hv pedestal fan
Również dla Dimplex DCPF40CH: Instrukcja obsługi (7 strony)

Drukuj stronę

Assembly

Lastly, attach the fan head to the motor - refer to Fig. 3 & the instructions below:

1. Remove the protective sleeve from the motor shaft (12) and the four fixing

screws from the motor housing. Attach the rear guard (4) to the motor housing

(9) using the four screws you just removed. Ensure the handle is at the top.

2. Place the fan blade (3) over the motor shaft (12) and tighten the fan blade

screw completely, ensuring that it tightens against the flat part of the motor

shaft.

3. Remove the front guard screw and nut (2, 5) from the front guard and release

the guard retaining clips (14) around the outside edge outwards.

4. Hang the front guard (1) by its hook over the top of the rear guard (4). Bring the

front guard down to meet the rear guard and fit the guard screw (2) through

the holes in the bottom edge of the guard and tighten with the nut (5). Finally

push the clips inwards until the front guard is attached to the rear guard.