Aeon Labs Minimote Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Pilot zdalnego sterowania Aeon Labs Minimote. Aeon Labs Minimote 7 stron. Z-wave remote controller
Również dla Aeon Labs Minimote: Podręcznik (7 strony)

Drukuj stronę

• Creating Scenes (and Removing Z-Wave Devices from Scenes)

1. Press and hold the scene button you wish to configure (top of enclosure) – The blue

LED will blink quickly after 1 second to show that it is ready to add/remove a device

from the scene.

2. Press the Z-Wave button on the product you wish add/remove (while still holding

the scene button from the previous step) - The blue LED on the Minimote will stay

solid to indicate the device has entered the scene.*

3. While still holding the scene button from Step-1, adjust the level of the

Lamp/Shade/product to the desired level.

4. Release the scene button to complete adding the device to the scene at the device's

current level.

* Note: If the product is already a part of that particular scene, it will be removed from

that scene the second time steps #1-4 are repeated for that particular product in that

scene.

Note: Z-Wave devices must be first added/included into the same network as the

Minimote in order to create a scene with that device.

• All On – Turn On All Z-Wave Devices in the Network

1. Press and hold the top-left and top-right scene buttons together.

• All Off – Turn Off All Z-Wave Devices in the Network

1. Press and hold the bottom-left and bottom-right scene buttons together.

• Dim Up/Down – Brighten/Dim the Z-Wave Devices Associated with a Scene

1. Press and hold the scene button to dim up (brighten) the devices associated with

the scene. – The blue LED will blink slowly.

2. Release the scene button at the desired lighting level.