Dimplex ComfortAir DIM2IN1 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Dimplex ComfortAir DIM2IN1. Dimplex ComfortAir DIM2IN1 11 stron. Comfortair 2in1 air conditioner and dehumidifier
Drukuj stronę
4.
Attach the pipe joint onto the ComfortAir (see arrow 4).
5.
Screw the exhaust pipe counterclockwise on to the pipe joint (see arrow 5).
5
6.
To remove the exhaust pipe, unscrew the exhaust pipe clockwise and take
it out (see arrow 6).
4
6
16
WINDOW KIT INSTALLATION
Install the Exhaust Hose and the Adjustable Window Slider Kit as depicted
in Fig.1 and Fig.1a.
Figure 1 - Vertical sliding
windows installation
TROUBLE SHOOTING
Problem
Cause
E1
Electrical short on both
temperature sensor and PCB.
E2
Electrical short of temperature
sensor copper tube and PCB
wiring.
E4
Indicates water tank full or
possibly incorrect placement
of drainage hose.
Figure 1a - Horizontal
sliding windows
installation
Trouble shooting
Contact an electrician for repair.
Contact an electrician for repair.
User needs to pull out the
rubber stopper which is located
within the water tank to drain
water held within the main unit.
Check that the drainage hose
has been positioned correctly.
17