DimSport F27ADBTOOTH3 Instrukcja instalacji i użytkowania - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Adapter DimSport F27ADBTOOTH3. DimSport F27ADBTOOTH3 4 stron.

_______________________________

1. Installation

1.1. Turn ignition off.

1.2. Plug the white 4 pin female plug into the

white 4 pin male plug of Rapid Bike

harness marked as USB.

1.3. Connect the red wire to a switched 12V source using the provided

posi-tap.

Do not connect the red wire directly to the positive side of the battery.

The red wire on the black 3 pin plug of the Rapid Bike harness marked as

AUX IN is a reliable 12V source.

1.4. Fasten the BlueBike adapter to the bike by means of the provided

Velcro

2. Pairing

The following procedure must be performed the first time BlueBike has to be paired with a new

Bluetooth device. After that, they connect automatically.

For further information follow the manufacturer's instructions for your device and operating system

for pairing Bluetooth devices.

2.1. Turn ignition on.

2.2. Turn on Bluetooth feature on your Bluetooth device.

TIP: The Bluetooth menu is usually found in the Settings menu.

2.3. Select BlueBike adapter from the device list.

2.4. Enter the passkey if prompted.

TIP: Passkey can be found on a white stick closed to

the white 4 pin female plug. It is same number of

serial number.

NOTE: Devices with Bluetooth 3.0 and further may not

prompt you for a passkey.

2.5. Bluetooth device will confirm once BlueBike adapter has been paired.

2.6. Turn ignition off.

Issued by: PM

Installing instructions __________________________________

approved by DG

Rev.00

date 10/04/19

pag. 3/4