Pioneer DEH P4800MP Instrukcja obsługi - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH P4800MP. Pioneer DEH P4800MP 36 stron. Multi-cd control high power cd/mp3/wma player with rds tuner

Drukuj stronę

MAN-DEH-P4800MP-GB.fm Page 26 Thursday, September 29, 2005 11:55 AM

Audio Adjustments

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q factor (curve characteristics) of each

currently selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Q=2N

Center frequency

Frequency (Hz)

1. Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears

in the display.

2. Press AUDIO to select the band for adjustment from among low, mid and high.

Press AUDIO repeatedly to switch between the following functions:

Low – Mid – High

3. Press 4 or 6 to select the desired frequency.

Press 4 or 6 until the desired frequency appears in the display.

Low: 40 – 80 – 100 – 160 (Hz)

Mid: 200 – 500 – 1k – 2k (Hz)

High: 3k – 8k – 10k – 12k (Hz)

4. Press 8 or 2 to select the desired Q factor.

Press 8 or 2 until the desired Q factor appears in the display.

2N – 1N – 1W – 2W

Note

• If you make adjustments, CUSTOM curve is updated.

Q=2W

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low

volume.

1. Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

2. Press 8 to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in the display.

3. Press 4 or 6 to select a desired level.

Each press of 4 or 6 selects level in the following order:

LOW (low) – MID (mid) – HI (high)

4. Press 2 to turn loudness off.

LOUD :OFF appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

1. Press SW to select SUB W.

SUB W appears in the display.

• You can also select the subwoofer setting menu by pressing AUDIO on the unit.

• When the subwoofer controller setting is P/O :FUL, you cannot select SUB W.

2. Press 8 to turn subwoofer output on.

SUB W:NOR appears in the display. Subwoofer output is now on.

• If the subwoofer output phase has been set to the reverse, SUB W:REV will be

displayed.

• To turn subwoofer output off, press 2.

3. Press 4 or 6 to select the phase of subwoofer output.

Press 4 to select reverse phase and REV appears in the display. Press 6 to select

normal phase and NOR appears in the display.