Pioneer DEH-1300MP Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-1300MP. Pioneer DEH-1300MP 21 stron. Cd receiver, autoradio cd, radio cd
Również dla Pioneer DEH-1300MP: Instrukcja obsługi (28 strony)

Drukuj stronę

Installation

This unit

2 3

1 Antenna input

2 Fuse (10 A)

3 Power cord input

4 Rear output

Power cord









1 To power cord input

2 Left

3 Right

4 Front speaker

5 Rear speaker

6 White

7 White/black

8 Gray

9 Gray/black

a Green

b Green/black

c Violet

d Violet/black

e Black (chassis ground)

Connect to a clean, paint-free metal location.

f Yellow

Connect to the constant 12 V supply terminal.

g Red

h Blue/white

Note

With a 2 speaker system, do not connect anything

to the speaker leads that are not connected to

speakers.

Power amp (sold separately)

Perform these connections when using the

optional amplifier.







1 System remote control



2 Power amp (sold separately)

3 Connect with RCA cables (sold separately)

4 To Rear output

5 Rear speaker

Installation

! Check all connections and systems before

! Do not use unauthorized parts as this may

! Consult your dealer if installation requires dril-

! Do not install this unit where:

Connect to terminal controlled by ignition

switch (12 V DC).

Connect to system control terminal of the

power amp or auto-antenna relay control

terminal (max. 300 mA 12 V DC).





Connect to Blue/white cable.

Important

final installation.

cause malfunctions.

ling of holes or other modifications to the vehi-

cle.

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

Section