Pioneer DEH-200MP Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-200MP. Pioneer DEH-200MP 47 stron. Cd rds receiver

Drukuj stronę

Section

Operating this unit

! If a track number 100 or more is selected,

d on the left of the track number indica-

tor will light.

3 AF indicator

Shows when AF (alternative frequencies

search) function is on.

4 TP indicator

Shows when a TP station is tuned in.

5 TA indicator

Shows when TA (traffic announcement

standby) function is on.

6 MP3/WMA indicator

Shows the type of the currently playing disc.

7 RPT indicator

Shows when repeat play is turned on.

8 LOUD indicator

Appears in the display when loudness is

turned on.

9 Stereo (5) indicator

Shows when the selected frequency is

being broadcast in stereo.

a LOC indicator

Shows when local seek tuning is on.

Basic Operations

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to page 9).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Tuner—Built-in CD player—AUX

Notes

! In the following cases, the sound source will

not change:

— When there is no disc in the unit.

— When AUX (auxiliary input) is set to off

(refer to page 13).

! AUX is set to on by default. Turn off the AUX

when not in use (refer to Switching the auxili-

ary setting on page 13).

! When this unit's blue/white lead is connected

to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when

this unit's source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Tuner

Listening to the radio

Press SOURCE to select the tuner.

Press BAND to select a band.

Press BAND until the desired band (F1, F2 for

FM or MW/LW) is displayed.

To perform manual tuning, briefly press

c or d.

To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.