Pioneer DEH-2200UB Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-2200UB. Pioneer DEH-2200UB 28 stron. Cd rds receiver
Również dla Pioneer DEH-2200UB: Instrukcja obsługi (20 strony), Instrukcja instalacji (8 strony)

Drukuj stronę

Section

Operating this unit

There are six stored settings DYNAMIC (dynamic),

VOCAL (vocal), NATURAL (natural), CUSTOM (cus-

tom), FLAT (flat) and POWERFUL (powerful).

! When FLAT is selected no adjustments are made

to the sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM—

FLAT—POWERFUL

3 Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustment)

You can adjust the bass/mid/treble level.

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press M.C. to display the setting mode.

2 Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

3 Turn M.C. to adjust the level.

Adjustment range: +6 to -6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—LOW(low)—HIGH (high)

3 Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The AM volume level can also be adjusted with

source level adjustments.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Notes

! When selecting FM as the source, you cannot

switch to SLA.

! Operation is complete even if the menu is can-

celled before being confirmed.

Initial Settings

Press SRC/OFF and hold until the unit

turns off.

Press M.C. and hold until CLOCK SET ap-

pears in the display.

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock dis-

play you wish to set.

Hour—Minute

As you select segments of the clock display, the

selected segment flashes.

3 Turn M.C. to adjust the clock.

AUX (auxiliary input)

Activate this setting when using auxiliary device con-

nected to this unit.

1 Press M.C. to turn AUX on or off.

USB (plug and play)

This setting allows you to switch your source to USB/

IPOD automatically.

1 Press M.C. to turn the plug and play on or off.

ON – When USB storage device/iPod is con-

nected, the source is automatically switched to

USB/IPOD. If you disconnect your USB storage

device/iPod, this unit's source is turned off.

OFF – When USB storage device/iPod is con-

nected, the source is not switched to USB/IPOD

automatically. Please change the source to USB/

IPOD manually.

ILLUMI (illumination color)

You can select the desired illumination color.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

RED (red)—GREEN (green)

3 Press M.C. to confirm the selection.

Note

Operation is complete even if the menu is can-

celled before being confirmed.