Pioneer DEH-3910MP Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer DEH-3910MP. Pioneer DEH-3910MP 37 stron. Cd receiver

Drukuj stronę

Section

Operating this unit

LCD display

1 Main display section

Shows the various information such as

band, play time, and other setting.

! Tuner

Band and frequency are displayed.

! Built-in CD Player (Audio CD)

Erapsed play time is displayed.

! Built-in CD Player (WMA/MP3/WAV disc)

Folder number and erapsed play time are

displayed.

! Audio and initial setup

Function names and setup status are dis-

played.

2 Stereo (5) indicator

Shows when the selected frequency is

being broadcast in stereo.

3 Preset number/track number indicator

Shows the track number or preset number.

! If a track number 100 to 199 is selected,

d on the left of the track number indica-

tor will light.

! If a track number 200 or more is selected,

d on the left of the track number indica-

tor will blink.

4 LOUD indicator

Appears in the display when loudness is

turned on.

5 LOC indicator

Shows when local seek tuning is on.

6 RPT indicator

Shows when repeat play is turned on.

7 FIE indicator

Shows when the front image enhancer is

turned on.

8 MP3/WMA indicator

Shows the type of the currently playing disc.

9 CUSTOM indicator

Shows when custom equalizer curve is cur-

rently selected.

Basic Operations

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to the next page).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Built-in CD player—Tuner

Notes

! When no disc has been set in the unit, the

source will not switch to the built-in CD player.

! When this unit's blue/white lead is connected

to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when

this unit's source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.