Pioneer DEH-P3000IB Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik samochodowy Pioneer DEH-P3000IB. Pioneer DEH-P3000IB 7 stron. Pioneer deh-p3000ib: install guide
Również dla Pioneer DEH-P3000IB: Instrukcja instalacji (4 strony), Instrukcja obsługi (20 strony)
Drukuj stronę
1. iPod with Dock
2. Dock connector port
Connector
3. Dock connector
4. Interface cable (e.g., CD-I200)
(sold separately)
5. Gray
2 m
7. Front output
6.This product
8. Rear output or
subwoofer output
9. Antenna jack
10.Fuse (10 A)
11. IP-BUS input (Blue)
13. Multi-CD player
12. IP-BUS cable
(sold separately)
14. Yellow
Connect to the constant 12 V supply terminal.
17. Blue/white
Connect to system control terminal
of the power amp or auto-antenna
15. Red
relay control terminal (max. 300 mA
Connect to terminal controlled by ignition
12 V DC).
switch (12 V DC).
16. Black (chassis ground)
Connect to a clean, paint-free metal location.
18. White
20. Gray
22. Front speaker
22. Front speaker
19. White/black
21. Gray/black
23. Left
24. Right
25. Green
27. Violet
29. Rear speaker
29. Rear speaker
26. Green/black
28. Violet/black
30. With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
34. Power amp
(sold separately)
31. To Rear output or
subwoofer output
34. Power amp
(sold separately)
32. To front output
33. Connect with RCA cables
(sold separately)
35. System remote control
22. Front speaker
22. Front speaker
23. Left
24. Right
36. Rear speaker
36. Rear speaker
or subwoofer
or subwoofer
37. Perform these connections when
using the optional amplifier.
Fig. 1
1. iPod with Dock
2. Dock connector port
Connector
3. Dock connector
4. Interface cable (e.g., CD-I200)
(sold separately)
5. Gray
2 m
7. Front output
6.This product
38.Subwoofer output
9. Antenna jack
10.Fuse (10 A)
11. IP-BUS input (Blue)
13. Multi-CD player
12. IP-BUS cable
(sold separately)
14. Yellow
Connect to the constant 12 V supply terminal.
15. Red
Connect to terminal controlled by ignition
switch (12 V DC).
16. Black (chassis ground)
Connect to a clean, paint-free metal location.
39. Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
17. Blue/white
Connect to system control terminal
of the power amp or auto-antenna
relay control terminal (max. 300 mA
12 V DC).
18. White
20. Gray
22. Front speaker
22. Front speaker
19. White/black
21. Gray/black
23. Left
24. Right
25. Green
27. Violet
40. Subwoofer (4 Ω)
40. Subwoofer (4 Ω)
26. Green/black
28. Violet/black
41. When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
43. Subwoofer
42. Not used.
(4 Ω) × 2
Fig. 2