Pioneer MVH-A200VBT Instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer MVH-A200VBT. Pioneer MVH-A200VBT 26 stron. Rds av receiver, divx, bluetooth, made for ipod/iphone
Drukuj stronę
Menu Item
Description
[Speaker Level]
Adjust the speaker output level of the listening position.
1
[Front Left] [Front Right]
Touch
[Rear Left] [Rear Right]
select the output speaker.
2
[Subwoofer] [Listening
Touch
Position]
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Rear Speaker Output].
[Crossover]
Select a speaker unit (filter) to adjust the HPF or LPF cut-off
frequency and the slope for each speaker unit (page 19).
[Subwoofer Settings]
Select the subwoofer phase, LPF cut-off frequency and the
slope (page 19).
[Listening Position]
Select a listening position that you want to make as the
[Off] [Front-L] [Front-R]
centre of sound effects.
[Front] [All]
[Time Alignment]
Select or customise the time alignment settings to reflect
[Front Left] [Front Right]
the distance between the listener's position and each
[Rear Left] [Rear Right]
speaker. You need to measure the distance between the
[Subwoofer] [Listening
head of the listener and each speaker unit.
1
Position]
Touch
select the alignment speaker.
2
Touch
selected speaker and listening position.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
[Bass Boost]
Adjust the bass boost level.
[0] to [+6]
[Rear Speaker Output]
Select the rear speaker output.
[Rear] [Subwoofer]
NOTE
This function is available when the source is off.
[Loudness]
Compensates for deficiencies in the low-frequency and
[Off] [Low] [Mid] [High]
high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function. (MVH-A200VBT)
Adjusting the cutoff frequency value
You can adjust the cutoff frequency value of each speaker.
or
to select the listening position then
or
to adjust the selected speaker output
or
to select the listening position then
or
to input the distance between the
The following speakers can be adjusted:
Front, Rear, Subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press
.
2
Touch
then
.
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch
or
to switch the speaker.
5
Touch
or
to set the cutoff position.
6
Touch
or
to set the cutoff slope.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off].
LPF/HPF
Video settings
The menu items vary according to the source.
[Time Per Photo Slide]
Menu Item
Description
[Time Per Photo Slide]
Select the interval of image file slideshows on this product.
[5sec] [10sec] [15sec]
[Manual]
[Video Signal Setting]
Menu Item
Description
[AUX]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to an AUX equipment.
M] [PAL-N] [SECAM]
[Camera]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to a rear view camera.
M] [PAL-N] [SECAM]
19
En