Pioneer NC-50DAB Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer NC-50DAB. Pioneer NC-50DAB 42 stron. Network cd receiver

Drukuj stronę

> Before Start

> Part Names

Firmware Update

The updating function on this unit

This unit has functionality to update the firmware (the

system software) over a network or by the USB port. This

enables us to make improvements to a variety of operations

and to add features.

For details about the updated play features, see here.

> Install

> Initial Setup

How to update

There are two methods for updating the firmware: via

network and via USB. The update may take about 5

minutes to complete for either method: via network or via

USB. Furthermore, existing settings are guaranteed

regardless of the method used for update.

0 For the latest information on updates, visit our company's

website. There is no need to update the firmware on this

unit if there is no update available.

0 When performed over the network, it may take even

more time depending on the connection status.

0 During an update, do not

– Disconnect and reconnect any cable or USB storage

device, or perform any operation on the component

such as turn off its power.

– Accessing this unit from a PC or smartphone using an

application

Disclaimer: The program and accompanying online

documentation are furnished to you for use at your own risk.

We will not be liable and you will have no remedy for

damages for any claim of any kind whatsoever concerning

your use of the program or the accompanying online

documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will we be liable to you or any third party for any

special, indirect, incidental, or consequential damages of

any kind, including, but not limited to, compensation,

reimbursement or damages on account of the loss of

present or prospective profits, loss of data, or for any other

reason whatsoever.

Updating the Firmware via Network

0 Check that the unit is turned on, and the connection to

the Internet is secured.

0 Turn off the controller component (PC etc.) connected to

the network.

> Playback

Advanced Setup |

0 Stop any playing Internet radio, USB storage device, or

server content.

1. The setup screen is displayed on the display when

SETUP on the remote controller is pressed.

Setup

2. Press / and ENTER to select "Update" - "via Network"

in order.

Setup

0 "Update" is not displayed if there are no firmware

updates.

3. Press ENTER to start the firmware update.

0 "COMPLETE" is displayed when the update is

complete.

4. Press Í STANDBY/ON on the main unit to switch the

unit to standby. The process is completed and your

firmware is updated to the latest version.

If an error message is displayed: When an error occurs,

"＊-＊＊ Error!" is displayed on the display of this unit. ("＊"

represents an alphanumeric character.) Check the

following:

Firmware Update

| Others

Network Setting

Option Setting

System Info

Factory Reset

Update