Pioneer P47DH - DEH Radio / CD Player Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik samochodowy Pioneer P47DH - DEH Radio / CD Player. Pioneer P47DH - DEH Radio / CD Player 9 stron. Multi-cd control high power cd player with fm/am tuner
Również dla Pioneer P47DH - DEH Radio / CD Player: Instrukcja obsługi (34 strony), Instrukcja serwisowa (4 strony)
Drukuj stronę
Connecting the Units
7 When using a Subwoofer without using a different amp (sold separately)
Subwoofer output
or Non Fading output
This product
Antenna jack
IP-BUS input (Blue)
Multi-CD player
(sold separately)
Black (ground)
To vehicle (metal) body.
Orange
To lighting switch terminal.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
To terminal always supplied
Yellow
with power regardless of
ignition switch position.
Fuse holder
If you use a cellular
Yellow/black
telephone, connect it via the
Audio Mute lead on the
cellular telephone. If not,
keep the Audio Mute lead
free of any connections.
<ENGLISH>
Caution:
Connect the supplied connector without
fail. If connectors other than the one
supplied with this product are used, there
is the possibility that sounds may mute
and memorized information could be
erased.
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white
White
Gray
+
+
Front
Front
White/black
Gray/black
≠
≠
Green
Violet
+
Subwoofer
≠
Green/black
Violet/black
Do not connect anything to these speaker leads.
Note:
Change the Initial Setting of this product.
(Refer to the Operation Manual.)
Installation
Note:
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit and supplied with the vehicle to ensure proper installation.
The use of unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• If installation angle exceeds 60° from horizontal, the unit might not give its optimum performance.
(Fig. 4)
60
Fig. 4
• The semiconductor laser will be damaged if it overheats, so don't install the unit anywhere hot – for
instance, near a heater outlet.
Fig. 3
<ENGLISH>
GM Panel Type Installation
An example is shown in Fig. 5. Fit the bracket provided on the vehicle to the unit in the
same way that it was fitted to the original car stereo.
Vehicle supplied bracket
(not included)
Sub dash
Hex nut (5 mm)
Quickie bolt
Vehicle supplied
screw (not included)
Tube
spacer
1
2
Bracket (not included)
Dash panel
In some cases,
this may not be provided
Quickie bolt slot
on the vehicle.
Fig. 5