Pioneer SPH-10BT Instrukcje aktualizacji oprogramowania sprzętowego

Przeglądaj online lub pobierz pdf Instrukcje aktualizacji oprogramowania sprzętowego dla Odbiornik samochodowy Pioneer SPH-10BT. Pioneer SPH-10BT 4 stron. Smartphone receiver
Również dla Pioneer SPH-10BT: Instrukcja instalacji (33 strony), Instrukcja obsługi (35 strony), Instrukcje aktualizacji oprogramowania sprzętowego (6 strony), Instrukcje aktualizacji oprogramowania układowego systemu (7 strony)

System Firmware Update Instructions for SPH-10BT

REMARKS:

 If you have any difficulty carrying out these instructions, please contact Pioneer

Customer Support. Once upgraded to this version, it is not possible to downgrade to a

lower version.

Please download and print these instructions before downloading and installing the



firmware update. It is important that you complete all steps correctly and in the order

described below.

This update applies only to SPH-10BT models which are sold in Europe



A. Check the current firmware version of the unit

PROCEDURE:

1. Start the vehicle engine.

2. If AV Source is On, Press and hold

if Pioneer Smart Sync is connected, please disconnect.

Press and hold the Application launch button, to display the "Initial "menu. then press to confirm.

4. Press ">" repeatedly to select "UPDATE", next press the Application launch button to confirm.

Select "S/W VER" to confirm the system info.

6. After the "S/W VER" screen appears, check the firmware version.

If the version number is 8.17 or higher, it is not necessary to update the firmware. If the version

number is lower than 8.17, it is necessary to update the firmware. Please continue to Step B.

SOURCE/MUSIC/OFF

button to switch off the source.

APPLICATION LAUNCH

launch

And