Pioneer Super Tuner III D DVH-P5850MP Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Odbiornik samochodowy Pioneer Super Tuner III D DVH-P5850MP. Pioneer Super Tuner III D DVH-P5850MP 43 stron. Car radio

Drukuj stronę

1. Conexión del Cable de Alimentación

Installation

Notes

• Before making a final installation of the unit,

temporarily connect the wiring to confirm that

the connections are correct and the system

works properly.

• Use only the parts included with the unit to

ensure proper installation. The use of unau-

thorized parts can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifi-

cations of the vehicle.

• Install the unit where it does not get in the

driver's way and cannot injure the passenger

if there is a sudden stop, like an emergency

stop.

• The semiconductor laser will be damaged if it

overheats, so don't install the unit anywhere

hot — for instance, near a heater outlet.

• If installation angle exceeds 30° from horizon-

tal, the unit might not give its optimum perfor-

mance.

DIN Front/Rear-mount

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN

Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer

to the following illustrated installation methods.

• The cords must not cover up the area shown

in the figure below. This is necessary to allow

the amplifires to radiate freely.

Do not close this area.

• When installing, to ensure proper heat disper-

sal when using this unit, make sure you leave

ample space behind the rear panel and wrap

any loose cables so they are not blocking the

vents.