Pioneer SUPER TUNER III KEH-7272 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer SUPER TUNER III KEH-7272. Pioneer SUPER TUNER III KEH-7272 21 stron. Cassette car stereo with fm/am electronic tuner
Drukuj stronęUsing the Radio
Volume/treble/
Clock
radio switch
Preset
Balance
Band/tuning
Local station
KEH-9292
Fader
Display
Loudness (KEH-9292, KEH-7272)
Local
Seek
Band —
LocsEEK^ m n n
F1 AM
F2
F3 CD
tuu.
-Preset number
• Before attempting operation...
• Reduce the volume by turning the volume control knob to the
left.
• Set the fader control to the left horizontal.
1. Press the radio switch to turn on power and display the frequen
cy.
2. Press the band switch to select the band.
3. Press the seek button and the seek tuning indicator will be dis
played.
4. Turn the tuning knob to the left or right to tune in the desired fre
quency. (Turning to the right will increase the frequency.)
5. Adjust the volume and balance.
6. Adjust the tone. To adjust the treble, first pull the knob until a
click is heard. After setting to the desired level, push the knob In
again to its original position.
• To enter a frequency into the preset memory...
7. Hold down one of the preset buttons (1 — 6) for approximately
two seconds. The frequency is stored in memory (assigned to the
preset button pressed) once the preset number stops flashing on
the display.
Six FM1 frequencies, six FIVI2 frequencies, six FM3 frequencies
and six AM frequencies can be entered.
Stereo
Frequency