Pioneer X-CM56 Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik samochodowy Pioneer X-CM56. Pioneer X-CM56 38 stron. Cd receiver system
Również dla Pioneer X-CM56: Instrukcja obsługi (40 strony)

Drukuj stronę

Additional information

When the Bluetooth wireless technology device is connected or operated

Problem

The Bluetooth wireless technology device cannot be connected or

operated.

Sound from the Bluetooth wireless technology device is not emitted

or the sound is interrupted.

Pairing cannot be performed using the NFC function.

Playable discs and formats

Audio CD

MP3 files recorded on CD-R/ -RW/ -ROM discs or USB storage devices

MP3

• Commercially available audio CDs

• CD-R/ -RW/ -ROM discs containing music recorded in the CD-DA format

Remedy

Check that no object that emits electromagnetic waves in the 2.4

GHz band (microwave oven, wireless LAN device or Bluetooth

wireless technology apparatus) is near the unit. If such an object is

near the unit, set the unit far from it. Or, stop using the object

emitting the electromagnetic waves.

Check that the Bluetooth wireless technology device is not too far

from the unit and that obstructions are not set between the

Bluetoothwireless technology device and the unit. Set the

Bluetooth wireless technology device and the unit so that the

distance between them is less than about 10 m* and no

obstructions exist between them.

* The distance given is to be used as a rough guide. The actual

allowable distance between devices may vary depending on

conditions in the surrounding environment.

The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless technology

device.

Check if this unit is connected with a Bluetooth wireless

technology device with an input source other than Bluetooth

selected. Perform paring procedure after selecting Bluetooth as

the input source.

Check the device to be connected support NFC.

Ensure that the NFC function on the device you are trying to

connect is turned on.

If BT STANDBY is not set to ON, this unit cannot pair with a

device when this unit is in standby mode. Check if BT STANDBY

is set to ON.

When pairing devices, move the NFC area (page 10) on this unit

close to where the NFC antenna on the device to be paired. For

the NFC antenna position on an NFC-equipped smartphone,

refer to the manual supplied with the NFC-equipped smartphone.

Use a compatible device with Android OS 4.1 or later.

This may not operate properly, depending on the smartphone or

tablet device.

Check that "Pairing" displays on the front panel display when an

NFC-equipped smartphone is held over this unit. If it is not

displayed, the NFC-equipped smartphone is not recognized by this

unit. Hold the NFC antenna on the NFC-equipped smartphone

close to the NFC area of this unit (page 10). If the NFC-equipped

smartphone is in a case, remove the case as necessary.