Pioneer A-209 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Pioneer A-209. Pioneer A-209 32 stron. Stereo amplifier
Również dla Pioneer A-209: Katalog (10 strony), Instrukcja serwisowa (35 strony)

Drukuj stronę

OPERATIONS

TO USE THE COMPONENT CONNECTED

TO THE TAPE 2 MONITOR TERMINALS

[For a cassette deck]

÷ A cassette deck connected here can be operated in the

same way (recording and playback) as a deck connected to

the TAPE 2 MONITOR terminals.

÷ Also, if two decks are used, you can copy tapes from one

deck onto the other (see the section on "COPYING TAPES").

1. Set the TAPE 2 MONITOR button to ON.

2. Operate the cassette deck to perform playback

(or recording).

NOTE:

The source selected with the INPUT SELECTOR knob is

backed up for a few days even when the POWER switch is set

to off or the power cord is unpluged.

After this period, the CD is automatically selected when the

power is supplied.

[For an adaptor component]

By connecting a graphic equalizer, source sounds (from discs,

tapes, AM/FM broadcasts, etc.) can be heard with added

sound and tone compensation.

Sounds compensated with the adaptor component can be

recorded on the cassette deck connected to the TAPE 1/CD-

R/MD terminals.

1. Set the TAPE 2 MONITOR button to ON.

2. Play back the source.

3. Operate the adaptor component.

NOTE:

Be sure to perform this operation with the adaptor component

power switch in the on position. Even when not using the

adaptor component, its power switch must be left on. If the

adaptor component is switched off, no sound will be pro-

duced, or the playback sound will be distorted.