Pioneer A-209 Instrukcja serwisowa - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Odbiornik Pioneer A-209. Pioneer A-209 35 stron. Stereo amplifier
Również dla Pioneer A-209: Katalog (10 strony), Instrukcja obsługi (32 strony)

Pioneer A-209 Instrukcja serwisowa
A-209R, A-209

8.2 SPECIFICATIONS

Amplifier Section
Continuous power output
(both channels driven at 20 Hz to 20 kHz)**
[A-209R]
T.H.D. 0.1 %, 8 Ω ..................................... 35 W + 35 W*
T.H.D. 0.15 %, 4 Ω ................................... 45 W + 45 W*
DIN Continuous power output
(both channels driven at 1 kHz)
[A-209R]
T.H.D. 1.0 %, 8 Ω ...................................... 45 W + 45 W
T.H.D. 1.0 %, 4 Ω ...................................... 60 W + 60 W
Total harmonic distortion**
[A-209R]
20 Hz to 20 kHz, 17.5 W, 8 Ω ............................. 0.08 %*
÷ Power output specification is for when power supply is
230 V.
Input sensitivity/impedance
PHONO (MM) ........................................... 2.8 mV/50 kΩ
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
.................................................................. 200 mV/50 kΩ
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ............................................ 150 mV
Output level/impedance
TAPE1 REC, TAPE2 MONITOR REC ....... 200 mV/1 kΩ
Frequency response
PHONO (MM) ......................... 20 Hz to 20 kHz, ±0.5 dB
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
.................................................... 5 Hz to 100 kHz,
Tone control
BASS ..................................................... ±8 dB (100 Hz)
TREBLE ................................................... ±8 dB (10 kHz)
Loudness contour (volume control set at –30 dB position)
....................................... +6 dB (100 Hz)/+4 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) ................................... 85 dB*
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
............................................................................ 106 dB*
Signal-to-Noise ratio (DIN, continuous power/50 mW)
PHONO (MM) ............................................. 71 dB/67 dB*
[A-209R]
CD, TUNER, LINE, TAPE1/CD-R/MD, TAPE2 MONITOR
................................................................... 91 dB/71 dB*

Accessories

34
+0
dB*
–3
Power cord
(MYXJ, MLXJ : ADG1154)
(SBDXJ : ADG1154,
VKX1007)
(MVXJ : ADG1156)
AA size IEC R6P
batteries (x2)
Power Supply/Miscellaneous
Power requirements ................... AC 220 – 230 V, 50/60 Hz
Power consumption
[A-209R] ................................................................ 130 W
Dimensions (including knobs and other protruding parts)
...................................... 420 (W) x 114 (H) x 307 (D) mm
Weight (without package)
[A-209R] ................................................................. 4.7 kg
Accessories
Remote control unit ............................................................ 1
Batteries (AA/R6P) ............................................................. 2
Power cord (Rated current 2.5 A) ...................................... 1
Operating instructions ........................................................ 1
Warranty card .................................................................... 1
NOTE:
Specifications and design are subject to possible modifica-
tions without notice, due to improvements.
* Measured with DIRECT button set to on.
** Measured by Audio Spectrum Analyzer.
Remote control unit (A-209R)
CU-A019 (AXD7193)