Pioneer DEH-P7400HD Instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Pioneer DEH-P7400HD. Pioneer DEH-P7400HD 39 stron. Cd rds receiver

Drukuj stronę

Section

Available accessories

1 Connection

For detailed instructions on connecting your

phone to this unit via Bluetooth wireless tech-

nology, see following section. Function and op-

eration on this page.

! To make best use of the technology, we rec-

ommend you register the phone to this

unit.

2 Registration

To register your temporarily connected phone,

refer to Set phone (registering a connected cel-

lular phone) on the next page.

3 Volume adjustment

Adjust the earpiece volume of your cellular

phone to your preference. The unit will record

the adjusted volume level as the default set-

ting.

! The volume of the caller's voice and ring

tone may vary depending on the type of

cellular phone.

! If there is a large volume difference be-

tween the ring tone and caller's voice, the

overall volume level may become unstable.

! Make sure to adjust the volume to a proper

level before disconnecting the cellular

phone from the unit. If the volume is

muted (zero level) on your cellular phone,

the volume level of your cellular phone re-

mains muted even after the cellular phone

is disconnected.

Making a phone call

Voice recognition

1 Press BAND/

and hold until Voice dial ap-

pears in the display.

Voice dial appears in the display. When Voice

dial ON is displayed, voice recognition func-

tion is now ready.

! If your cellular phone does not feature

voice recognition function, No voice dial

appears in the display and operation is not

possible.

2 Say the name of your contact aloud.

Taking a phone call

Answering or rejecting an incoming call

Answering an incoming call

1 When a call is received, press M.C.

! You can also operate this function by turn-

ing LEVER to the right.

Ending a call

1 Turn LEVER to the left.

Rejecting an incoming call

1 When you receive a call, turn LEVER to the

left.

Notes

! If private mode is selected on the cellular

phone, hands-free phoning may not be avail-

able.

! The estimated call time appears in the dis-

play (this may differ slightly from the actual

call time).

Available accessories

Operating a call waiting

Answering a call waiting

1 When a call is received, press M.C.

! You can also operate this function by turn-

ing LEVER to the right.

Ending all calls

1 Turn LEVER to the left.

Switching between callers on hold

1 Press M.C.

! You can also operate this function by turn-

ing LEVER to the right.

Canceling call waiting

1 Turn LEVER to the left.

Notes

! Turn LEVER left to end all calls including

calls waiting on the line.

! To end the call, both you and the other caller

must hang up your phones.

Function and operation

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

Search&Connect (searching for available cellular

phone)

! This function cannot be operated when a cellu-

lar phone is connected.

1 Press M.C. to select the function.

2 Press M.C. to search for available cellular

phones.

While searching, Searching flashes. When

available cellular phones featuring Bluetooth

wireless technology are found, device name or

Name not found (if names cannot be ob-

tained) is displayed.

! If this unit fails to find any available cellular

phones, Not found is displayed.

3 Turn M.C. to select the name of the device you

want to connect.

4 Press M.C. to connect the selected cellular

phone.

While connecting, Connecting flashes. To

complete the connection, check the device

name (Pioneer BT Unit) and enter the link

code on your cellular phone. If the connection

is established, Connected is displayed.

! PIN code is set to 0000 as the default. You

can change this code. Refer to

Pin code input (PIN code input) on page

15.

Connection open (connecting from cellular

phone)

! This function cannot be operated when a cellu-

lar phone is connected.

1 Press M.C. to open the connection.

Disconnect phone (disconnecting a cellular

phone)