Pioneer dvh-885avbt Instrukcja obsługi - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Pioneer dvh-885avbt. Pioneer dvh-885avbt 40 stron.

Drukuj stronę

Operating this unit

Aspect Ratio:

4:3: For 4:3 TV picture.

16:9: For 16:9 wide screen TV.

Note

There is no 16:9 specification for VCD; for VCD

the video output only in 4:3 format; in our setting

menu, 4:3 or 16:9 setting is for video monitor

setting, but not mean that DVD will output video

signal in 4:3 or 16:9 format; which means current

our TFT is in 16:9, when we play VCD, if we want

to keep the video signal without distortion, the

video should not be set to full screen like 16:9.

Mirror:

When select "On", the video of camera is

mirror image.

Camera Polarity:

Select Camera Polarity Battery, Ground or

Off.

Battery: When the polarity of the connected

lead is positive while the gear shift is in

REVERSE (R) position

Ground: When the polarity of the connected

lead is negative while the gear shift is in

REVERSE (R) position

Off: The camera polarity is disabled.

AV Input:

Select Av Input on or off.

AUX:

Select auxiliary device on or off.

Demo:

Select Demo mode on or off.

Text Scroll:

Select Text Scroll on or off.

Language

Language:

Select on-screen display language.

Subtitle:

Select subtitle language.

Options available depending on DVD disc.

Audio:

Select audio language.

Options available depending on DVD disc.

DVD Menu:

Select DVD menu language.

Options available depending on DVD disc.

Audio

Loudness:

Turn on or off the loudness.

SubWoofer:

Selecting 80Hz, 120Hz or 160Hz to activate

subwoofer-out.

Selecting subwoofer off to activate rear line-

out.

Sub Volume:

Select subwoofer volume: 0 to 33.

• Sub Volume couldn't be adjusted when

SubWoofer Off is selected.

Radio

LOC DX:

Select radio local or distant.

LOC: Only stations with strong signal can

be received.

DX: Stations with strong and weak signals

can be received.

Stereo / Mono:

Select FM stereo or mono.

FM Step (FM tuning step):

Select FM step 50kHz or 100kHz

seek tuning step

• The tuning step remains at 50kHz during

manual tuning.

AM Step (AM tuning step):

Select AM step 9kHz or 10kHz

The AM tuning step can be switched

between 9kHz and 10kHz.

• W h e n t h e s e t t i n g i s c h a n g e d , t h e

frequency and preset channels are

initialized.

Bluetooth

Bluetooth:

If the Bluetooth is setting is On, then the

BT will be available , otherwise the BT will

never work and in disable status.

Connect:

If the Connect is set to Auto, then BT of

the unit will connect automatically with the

HFP device which is already paired in every

disconnect status (Bluetooth must be "On").

Auto Answer:

If the Auto Answer is set to Auto, then

BT of the unit will answer the in-coming

call automatically when the BT is already

connected with your HFP device( Bluetooth

must be "On"), otherwise you have to

answer the in-coming call by press answer

button of the remote or panel.

Section