Pioneer VSX-454 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik Pioneer VSX-454. Pioneer VSX-454 27 stron. Audio/video stereo receiver

Drukuj stronę
Pioneer VSX-454 Instrukcja obsługi
REAR PANEL FACILITIES
9 CONTROL IN/OUT jacks
43 REAR SPEAKERS terminals
IN
:Connect this jack to other Pioneer components when
Connect the rear speakers to these terminals.
using those components to control this unit.
NOTES:
OUT
:Connect this jack to other Pioneer components when
* Do not allow any of the cord's conductors to protrude from the
using the remote control of this unit to control the
other components.
NOTE :
The receiver's remote sensor does not function when a plug is
inserted in the IN jack. To operate, point the remote control unit at
the remote sensor on the component te which the receiver's IN jack
is connected.
terminals
or touch any other conductors.
Malfunctions
or
breakdowns may occur when conductors come into contact with
each other. Use rear speakers with an impedance of 8 Q to 16 22.
* Be sure to connect two speakers {L, R). There will be no sound if
only one speaker is connected.
4 FRONT SPEAKERS terminals
A
:Connect to the first set of speakers.
CONTR
ai
B
-Connect to the second set of speakers.
@es
NOTE:
agi
=
Do not allow any of the cord's conductors to protrude from the
ecelvel: re
:
terminals or touch any other conductors. Malfunctions or breakdowns
]
Pioneer component
may occur when conductors come into contact with each other. Use
rant
bearing the &i mark.
front speakers with an impedance of 8 Qto 16EQ.
¢
To
th
ramet
Tome CONTROL eck
Power cord
control unit
Ps
bearing the §} mark.
() SUB WOOFER PRE OUT jack
lf you want to boost the low frequencies, connect to a
subwoofer power amplifier.
43 CENTER SPEAKER terminals
Connect the center speaker to these terminals.
NOTE:
Do not allow any of the cord's conductors to protrude from the
terminals or touch any other conductors. Malfunctions or breakdowns
may occur when conductors come into contact with each other. Use
Speaker with an impedance of 8Q to 162.
10
<ARB7025>