Pioneer VSX-LX101 Podręcznik podstawowy - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik podstawowy dla Odbiornik Pioneer VSX-LX101. Pioneer VSX-LX101 28 stron.

> Before start

> Hookup

Step2: Connect the Speakers

1/2˝

(12 mm)

1 Speaker cable, 2 Subwoofer cable

> Setup

> Playback

> Part Names

in case of:

Pages 3 to 7

Connect 123456 for a 5.1-channel system.

For a 7.1-channel system, select either surround back

speakers or height speakers, and connect 78.

Up to two powered subwoofers can be connected. The

same signal is output from each of the SUBWOOFER

jacks.

Setup

0 The speaker configuration is set to

12345678 audio output by default. If there

are speakers you won't be connecting, you need to

change the settings in Initial Setup, "1. Full Auto

MCACC" ( P17) so that the audio from those

speakers you are not connecting is sent to other

speakers.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.