Pioneer VSX-LX302 Podręcznik podstawowy - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik podstawowy dla Odbiornik Pioneer VSX-LX302. Pioneer VSX-LX302 36 stron.

> Before Start

> Part Names

Step2: Connect the Speakers

a Speaker Cable, b Subwoofer Cable

> Install

> Initial Setup

3/8˝

(10 mm)

Speaker B

> Playback

Standard Connections (Pages 8 to 12)

Connect 12345678 for a 7.1 channel system.

Connect 1234569: for a 5.1.2 channel system. Up

to two powered subwoofers can be connected. The same

signal is output from each of the SUBWOOFER PRE OUT

jacks.

0 You can also connect both 78 and 9:. However, you

can only output audio from one of these at a time. When

both are connected, you can switch which speakers to

prioritize. Press

"Other" - "Speakers" to switch between surround back

speakers and height speakers and to switch speakers A

and B.

Setup

0 Settings for the speaker configuration you have

connected need to be made in "1. Full Auto

MCACC" in Initial Setup (P26).

Make sure the exposed speaker cables do not

stick out of the speaker terminals when

connecting. If the exposed wires of the

speakers touch the rear panel or the + and –

wires touch each other, the protection circuit

will be activated.

on the remote control (P6) and use