Pioneer VSX-S300-k Instrukcje obsługi - Strona 24

Przeglądaj online lub pobierz pdf Instrukcje obsługi dla Odbiornik Pioneer VSX-S300-k. Pioneer VSX-S300-k 36 stron. Audio/video multi-channel receiver
Również dla Pioneer VSX-S300-k: Skrócona instrukcja obsługi (33 strony)

Drukuj stronę

Listening to your system

Using the Sound Retriever

When audio data is removed during the compression

process, sound quality often suffers from an uneven sound

image. The Sound Retriever feature employs new DSP

technology that helps bring CD quality sound back to

compressed 2-channel audio by restoring sound pressure

and smoothing jagged artifacts left over after compression.

STANDBY/ON

D AUX

A AUX

iPod USB NETWORK

ADAPTER

 Press S.RTRV to switch the SOUND RTRV (Sound

Retriever) ON or OFF.

Note

• The Sound Retriever is only applicable to 2-channel

sources.

Setting the Up Mix function

In a 7.1-channel surround system with surround speakers

placed directly at the sides of the listening position, the

surround sound of 5.1-channel sources is heard from the

side. The Up Mix function mixes the sound of the surround

speakers with the surround back speakers so that the

surround sound is heard from diagonally to the rear as it

should be.

• Using the Up Mix function is effective when the speakers

in the 7.1-channel surround system are set up as

ECO

recommended in the example on page 9.

S.RTRV

• Depending on the positions of the speakers and the

AUTO /

sound source, in some cases it may not be possible to

DIRECT

achieve good results. In this case, set the setting to OFF.

ALC/

UPMIX OFF

Switch the receiver into standby.

Press and hold INPUT SELECTOR button on the front

panel for more than five seconds, and then press TUNER

button on the remote control.

UPMIX OFF appears and the Up Mix function turns off. If you

want to turn this function on, perform steps 1 and 2 again.

Note

• Set to ON regardless of this setting when playing DTS-HD

signals.

• May automatically be set to OFF even when set to ON,

depending on the input signal and listening mode.

UPMIX ON

C SW

SBL

SBR

SBL

SBR

Setting the Audio options

There are a number of additional sound settings you can

make using the TOOLS menu. The defaults, if not stated, are

listed in bold.

Important

• Note that if a setting doesn't appear in the TOOLS menu,

it is unavailable due to the current source, settings and

status of the receiver.

SOUND

RECEIVER

PORTABLE

WING

AUDIO

DISP

SLEEP

SP-AB

DIMMER

STATUS

TOP

TOOLS

VOL

ENTER

iPod

CTRL

HOME MENU

RETURN

RECEIVER

Press

, then press TOOLS button.

Use / to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

Use / to set it as necessary.

See the table below for the options available for each setting.

Press RETURN to confirm and exit the menu.

Setting/What it does

MIDNIGHT/LOUDNESS

The MIDNIGHT allows you to hear effective

surround sound of movies at low volumes.

The LOUDNESS is used to get good bass and

treble from music sources at low volumes.

BASS

Adjust the bass level to accentuate or

minimize the bottom end.

Option(s)

MID/LDN OFF

MIDNIGHT

LOUDNESS

–6 to +6

Default: 0