Pioneer VSX-524-K Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-524-K. Pioneer VSX-524-K 40 stron. Av receiver
Również dla Pioneer VSX-524-K: Instrukcja obsługi (38 strony), Instrukcja obsługi (40 strony), Skrócona instrukcja obsługi (21 strony), Skrócona instrukcja obsługi (21 strony)
Drukuj stronę
1
1
15
iPod iPhone DIRECT CONTROL
Change the receiver's input to the iPod and enable iPod
operations on the iPod
(page
24).
16
iPod/iPhone terminal
Use to connect your Apple iPod or USB mass storage device
as an audio source
(page
17).
Display
17
PHASE
Lights when the Phase Control is switched on
18
AUTO
Lights when the Auto Surround feature is switched on
(page
28).
19
Tuner indicators
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode
(page
26).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
20
Speaker indicators
Shows if the speaker system is on or not
SPA means the speakers are switched on.
SP means the speakers are switched off.
21
Sleep timer indicator
Lights when the receiver is in sleep mode
22
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
23
Character display
Displays various system information.
24
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing
(page
30).
25
Dolby Digital indicators
2 D – Lights when a Dolby Digital encoded signal is
detected.
2 D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
2HD – Lights when a source with Dolby TrueHD encoded
audio signals is detected.
2PLII – Lights to indicate 2 Pro Logic II decoding (see
Listening in surround sound on page 28
26
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see
Using the Advanced surround on page 29
more on this).
27
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
(page
6).
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
(page
8).
is not provided.
28
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on
(page
29).
(page
28).
for more on this).
for
7
Controls and displays
4
6
36