3Com 3C905C-TX-M Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Karta sieciowa 3Com 3C905C-TX-M. 3Com 3C905C-TX-M 12 stron. Etherlink pci network interface cards
Również dla 3Com 3C905C-TX-M: Skrócona instrukcja obsługi (12 strony)
Drukuj stronę
4
E
L
THER
INK
Installing Multiple NICs
If you are installing multiple 3C905C NICs in a PC or server,
follow the instructions in "Installing Multiple NICs" in
Chapter 3 of the user guide. Do not follow the instructions
in this quick guide.
Upgrading Windows 95 to Windows 98
If you are upgrading a PC from Windows 95 to
Windows 98 that already has a 3C90x NIC installed,
follow the instructions in the WIN98.TXT file located
in the HELP directory on EtherDisk diskette 3.
Updating EtherDisk Software
If you want to update your current version of EtherDisk
software to EtherDisk 5.x software, follow the instructions
in the text file appropriate for your operating system in the
HELP directory on EtherDisk diskette 3.
Running the Preinstallation Program
Before you physically install the NIC in a PC, you must run
the following preinstallation program to properly set up
your system environment.
CAUTION: If you do not perform this procedure, the NIC
driver and software will not be installed correctly.
To run the NIC preinstallation program:
1 Do not install the NIC in the PC.
2 Turn on the power to the PC and start Windows.
3 Insert EtherDisk diskette 1 in drive A.
4 From the Windows Start menu, select Run.
5 Run the preinstallation program. Enter:
a:\preinstl
6 After the preinstallation program finishes, turn off
the power to the PC.
The next step is to install the NIC in the PC.
10/100 PCI
C
FOR
OMPLETE
PC M
NIC
ANAGEMENT
Q
G
S
UICK
UIDE