Pioneer VSX-9700S Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-9700S. Pioneer VSX-9700S 48 stron.

Drukuj stronę

WATCHING VIDEO SOURCES

Refer to page 9 ''Video Component Connection." and page 35.

1. Connect the video components to the VCR 1, VCR 2, VCR 3,

VDP/CDV or VIDEO jacks.

2. Connect the TV set,

Connect the receiver's VIDEO OUT TO MONITOR TV jack to the

TV {or monitor TV) video input terminal.

3. Press the POWER switch to the ON position, and turn on the power

to the other components used.

4. Set the INPUT

SELECTOR

switch

to the appropriate

video

component to be played back.

5. Play back the video component.

6. Operate the TV set to display the playback picture.

¢ When using a TV set equipped with video input terminals, set it

to video input playback mode.

connected to VIDEO jacks.

SOUND RECORDING WITH AN AUDIO TAPE DECK

RECORDING

1. Connect the audio source component while referring to page 8

'Audio Component Connection."' and page 34.

2. Press the POWER switch to the ON position.

3. If recording on TAPE 2, turn off the TAPE 2 MONITOR switch.

If recording

on TAPE

1, the source

selected

by the INPUT

SELECTOR

switches

will be recorded

(except for TAPE 2

MONITOR switch).

4. Use the INPUT SELECTOR switch to select the desired program

source.

CALL

switch if the station has been preset. If the desired station has

not been preset, tune in the station using Auto, Manual or Direct

Access tuning.

. Play the desired program source (record, compact disc, 2tc.).

. Begin recording by following the operating procedures for the

applicable cassette deck.

* The volume, balance and tone controls have no effect on the

Cassette deck

recording.

ea Hon

CD player