Pioneer VSX-9700S Instrukcja obsługi - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-9700S. Pioneer VSX-9700S 48 stron.

REAR PANEL FACILITIES

@) FRONT AMP jacks

[PRE-OUT]

When a separate power amplifier is used to drive the front speakers,

connect the power amplifier to these jacks.

[POWER IN]

When a separate pre-amplifier is connected and this unit is used as

power amplifier, connect the pre-amplifier to these jacks.

@ FRONT SPEAKERS terminals

A: Connect to a first set of speakers.

B: Connect to a second set of speakers.

Please refer to item @3) Front speakers impedance selector switch.

@) Front speakers impedance selector switch

Set this switch to match the impedance of your speakers.

position

AORB_J

{f_AORB;

49 TO LESS THAN 8

8 Q OR MORE

A + B; 8 O OR MORE

[1] When using one pair of speakers:

8 2 or more

[i] When using two pairs of speakers:

Select @ as the selector switch position and use speakers having

impedance of 8 Q or more.

NOTE:

Turn off the receiver's power before changing the impedance selector

Switch setting.

REAR SPEAKERS terminals

Connect the rear speakers to these terminals.

Speaker impedance

Connect speaker systems with a nominal impedance of between 8 and

1629.

NOTE:

Do not allow any of the cord's conductors to protrude from the terminals

or touch any other conductors. Malfunctioning or breakdowns may

occur when conductors come into contact with each other.

@) AC Power cord

Connect to AC wall socket.