Pioneer VSX-9700S Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-9700S. Pioneer VSX-9700S 48 stron.

Drukuj stronę
SURROUND EFFECT
SURROUND SPEAKER INSTALLATION EXAMPLE
To get the best effect out of the surround system, place the speakers
as shown below.
An example for center speaker location
CENTER SPEAKER
FRONT
SPEAKER
TWO WAY SOUND EFFECTS
NOTE:
© To avoid interference with the picture on a nearby TV set, use
magnetically shielded speaker systems. This is particularly important
for the center speaker since it is usually located closest to the TV.
© Position the left and right channel speakers at equal distances from
the TV set and approximately six feet from each other.
® Position the center speaker above, below, or behind the TV set. Sound
may not appear to coincide with the picture if you position it next to
the TV set.
© Rear speakers are best positioned slightly above ear level.
Manufactured under license from Dolby Laboratories Licensing
Corporation.
Additionally licensed
under one or more of the
following patents: U.S. numbers 3,632,886, 3,746,792 and
3,959,590;
CANADA
numbers
1,004,603
and
1,037,877.
"Dolby'' and the double-D
symbol
are trademarks
of Dolby
Laboratories Licensing Corporation.
Manufacturé
sous
licence
de
Dolby
Laboratories
Licensing
Corporation. En outre, sous license d'un ou plusiers des brevets
suivants:
numéros
américains
3,632,886,
3,746,792
et
3,959,590; numéros canadiens
1,004,603
et 1,037,877. Le
terme ''Dolby'' et le symbole Double-D sont des marques dépsoées
de Dolby Laboratories Licensing Corporation.
Note:
Dolby Surround will not operate correctly if the signal passes through
a graphic equalizer.
When using Dolby Surround, turn off the TAPE 2 switch or set the
graphic equalizer for flat response or to its ''through (defeat)'' (or
off) setting, if it has one.
VCR NOISE FILTER
When playing back video tapes, if the audio channels contain noticeable
high-frequency tape hiss, pressing this switch will improve the sound.
NOTE:
The VCR NOISE FILTER has no effect on VCR 3 playback.
SIMULATED STEREO
This function transforms monaural signals into simulated stereo sound.
Use it when you wish to experience a sense of stereo presence when
listening to AM broadcasts,
a monaural VCR or other monaural signal
sources.
NOTE:
The simulated stereo function can also be used with stereo sound
sources, but it will result in an effect somewhat different from the normal
stereo sound.
7
<ARB1234>
|
|
|
|
|
|