Pioneer VSX-D411 Instrukcja obsługi - Strona 33

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-D411. Pioneer VSX-D411 44 stron. Audio/video multi-channel receiver
Również dla Pioneer VSX-D411: Instrukcja serwisowa (4 strony)

Drukuj stronę

Setting up the receiver

Setting the relative volume level

of each channel

• Default setting: 0 dB

For best surround sound playback, you should

set the relative channel levels from the main

listening position. You can set seperate levels

for each surround mode.

Press STANDARD.

Press TEST TONE to output the test

tone.

The test tone is output in the following order

(depending on the speaker setting):

If you don't hear a test tone from one of your

speakers, please refer to Speaker setting on

page 30 to make sure you have correctly

specified your speaker setup.

Press MASTER VOLUME +/– to adjust

the volume to an appropriate level.

Use LEVEL +/– to adjust the speaker

levels in turn.

You should hear the test tone at the same

volume from each speaker when seated in the

main listening position. The channel level range

is ± 10 dB.

When you're done, press TEST TONE to

turn off the test tone.

The speaker volume can be adjusted without

outputting the test tone by pressing CH

SELECT and then using LEVEL +/–.

• Test tone is only output in Standard

• Since the subwoofer transmits an ultra-low

modes.

frequency its sound may seem quieter

than it actually is.

STANDARD

MASTER

VOLUME