Pioneer VSX-D510 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik stereo Pioneer VSX-D510. Pioneer VSX-D510 40 stron. Audio/video multi-channel receiver
Również dla Pioneer VSX-D510: Instrukcja obsługi (36 strony), Instrukcja serwisowa (14 strony)

Drukuj stronę

MEMO:

• The initial setting is "

100 Hz

• If all speakers (front, center, and surround) are set to

"Large" in SPEAKERS setting mode, the crossover

frequency cannot be set because there are no "Small"

speakers (

appears in the display).

***

LFE attenuator setting mode

Dolby Digital and DTS audio sources include ultra-low

bass tones. Set the LFE attenuator as needed to prevent

the ultra-low bass tones from distorting the sound from

the speakers.

Press % or ﬁ to set the attenuation level (0

dB, 10 dB or ** dB(∞)).

0 dB

10 dB

∞

(display "

MEMO:

• The initial setting is "

0 dB

∞

• When

is selected (

is not available.

Low cut filter ON/OFF setting mode

Turn the low cut filter

output through the subwoofer.

Press % or ﬁ to select low cut filter ON or

OFF.

MEMO:

• The initial setting is "

OFF

• If the SUBWOOFER is set to "

SUBWOOFER ON/OFF setting mode, the low cut

filter cannot be set.

appears in the display), LFE

when distorted sound is

" in the

OFF

FRONT speakers distance setting

mode

Sets the distance from the FRONT speakers to the

listening position.

Press % or ﬁ to set the distance of the

FRONT speakers from the main listening

position (within a 9.0 m range).

MEMO:

• The initial setting is 3.0 m.

• One step equals about 0.3 m.

CENTER speaker distance setting

mode

The center speaker is normally placed directly in front of

the listening room and is thus closer to the listening

position than the Front speakers. This means that the

sound from the center speaker will be heard before the

Front speakers. To prevent this, set the center speaker

distance setting to delay the sound from the center

speaker so that the sound from the Front and center

speakers will be heard at the same time.

Press % or ﬁ to set the distance of the

CENTER speaker from the main listening

position (within a 9.0 m range).

MEMO:

• The initial setting is 3.0 m.

• When "

" is selected in SPEAKERS setting mode,

the center distance cannot be set.

• One step equals about 0.3 m.

Preparations