3Com 3C905C-TX-M Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Karta sieciowa 3Com 3C905C-TX-M. 3Com 3C905C-TX-M 12 stron. Etherlink pci network interface cards
Również dla 3Com 3C905C-TX-M: Skrócona instrukcja obsługi (12 strony)
Drukuj stronę
| 4
ETHERLINK® PCI NETWORK INTERFACE CARDS QUICK GUIDE
oe
Chae
PD
7 Click Install NIC Driver.
=
To install the network driver and the 3Com NIC
Diagnostics program, click Install with Diagnostic Program.
a
To install the network driver only, click
Install without Diagnostic Program.
Files are copied. A message box appears when the
installation is complete.
8 Click OK.
Select your operating system to continue
the installation.
The Completing NIC Installation screen appears.
10
Click Done.
11
Exit the EtherCD, and then shut down Windows.
12
Turn off the power to the PC.
Do not remove the EtherCD from the CD-ROM drive.
The next step is to install the NIC in the PC.
Installing the NIC in the PC
To install the NIC in the PC:
1 Make sure that you have run the preinstallation
program, as described in the previous section.
2 Remove all jewelry from your hands and wrists. Use
only insulated or nonconducting tools.
3 Turn off the power to the PC and unplug the
power cord.
Remove the cover from the PC.
5 Locate an empty, nonshared bus-mastering PCI slot
and remove its slot cover. Save the screw.
Do not install the NIC in a shared PCI slot. Avoid any
PCI slot next to an ISA slot. This is often a shared slot
and does not support bus mastering.