Pioneer A-402 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer A-402. Pioneer A-402 13 stron.
Drukuj stronę
SPECIFICATIONS
[A-402]
Amplifier Section
Continuously Average Power Output is 60 Watts***
per channel, min., at 8 ohms from 20 Hertz to 20,000
Hertz, with no more than 0.009 %** total harmonic
distortion.
Continuous power output (both channels driven at 20 Hz to 20 kHz)**
T.H.D. 0.009 %, 8 Q 0.0... ccccccscseeeeteneeeteesessccereas 60 W + 60 W*
THD i:0:02:%074: Qe svc ccccdsduwadsadersnnegulvasvaateoccssevss 80 W + 80 W*
Dynamic power output (on EIA dynamic test signal)
$:0/4 O/2 Qo revivsiassvvesddacdesausteadeueiidenevieasens 75 W/110 W/150 W
Total harmonic distortion **
20 Hz to 20 kHz, GO W, 8 Qu...
..cc cee ceeeeceseeerenseeereunees 0.009 %*
20 Hz to 20 kHz, 80 W, 4 Qo... .cccececcecseseusccueeauenevsasenes 0.02 %*
Input sensitivity/impedance
PHONO (MM) .....0:..:ccnecssccsusescunsvesersccusevsseucenunes 2.5 mV/50 kQ
CD, TUNER, LINE, TAPE ...........::::ecceesseceeecetroees 150 mV/40 kQ
PHONO overload level
1 kHz, T.H.D. 0.008 % (MM). ..........:.:cecceccerecstsastertennsees 150 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT
...........02ccesseeceeeeee 150 mV/1 kQ
Frequency response
PHONO (MM) ........seccecssescecanscecantersaes 20 Hz to 20 kHz +0.3 dB
CD, TUNER, LINE, TAPE ...........cesessensees 5 Hz to 100 kHz +3 dB*
Tone control (volume control set at —30 dB position)
BASS eccsicvseteccdeatvaantus
svieueed dluvdcoucedeeinossnstasasetca +8 dB (100 Hz)
TREBLE isis dcawchcareindeotosccsancsatatancaae
shapes +8 dB (10 kHz)
Filter (SUBSONIC)
oo... ceeceececeseeeeneeeeeseeeeees 17 Hz (12 dB/oct.)
Signal-to-Noise ratio (IHF short circuit,
A network)
PHONO (MM, 5 mV input) .............cccccecceeeeseenseessenseeeees 93 dB*
CD, TUNER, LINE, TAPE ............ccscceccseceecsenseseesenseoses
108 dB*
Power Supply/Miscellaneous
Power Requirements .............. AC 110 V/120—127 V/220 V/240 V
(Switchable), 50/60 Hz
Power COnSumption
.........ccsescscccececsecearseeecutsassnerseseeseces 550 W
AC outlets
SWITCHED (X-2) sccediaccusccidecen
cass enes yeaunddaavautietesdedsaeasdiaeese 200 W
UNSWITCHE: (Ki):
decid eicciiesGihe acted
nin dekceoieis Aieesbeceet 100 W
DIMENSIONS .........cccececeecececueveces 420 (W) x 347 (D) x 126 (H) mm
Weight (without package) .........ccccccsseecsccecssseeeeeeseeeeeeesenees 8.1 kg
Accessories
Operating InStructiOns ...........cccccceceesecetcececcectercecsecseseneetoscesens
1
NOTE:
Specifications and design are subject to possible modifications
without notice, due to improvements.
*Measured with DIRECT switch set to on.
**Measured by Audio Spectrum Analyzer.
***Measured pursuant to the Federal Trade Commission's Trade
Regulation rules on Power Output Claims for Amplifiers.
[A-302]
Amplifier Section
Continuously Average Power Output is 40 Watts***
per channel, min., at 8 ohms from 20 Hertz to 20,000
Hertz, with no more than 0.01 %** total harmonic
distortion.
Continuous power output (both channels driven at 20 Hz to 20 kHz)**
TEADs.0:07 '%6,; 8's scvisiicnca Aideetecaneniadeandeadaeateine 40 W + 40 W*
T.H.D. 0.02 %, 4 @ ...ccscccencesecseccseccerseeseseeesesaetens 50 W + 50 W*
Dynamic power output (on EIA dynamic test signal)
B74 O12: Oi iieiivccsbued
nicoveseaied danbes vou udeandits 55 W/90 W/100 W
Total harmonic distortion **
20 Hz to 20 kHz, 40 W, 8 Q .......ccccsscesceseeerevceeeetseeeerees 0.01 %*
20 Hz to 20 KHz, 50 W, 4 Q .....cceeccscceeeerseeeseeneeesseeeeneees 0.02 %*
Input sensitivity/impedance
PHONO! (MM) jvccicesscsccssdcsscevscvaeds
sed ni civiacccuecvaaess 2.5 mV/50 kQ
CD, TUNER, LINE, TAPE
.........csccessesesusssessceeeenes 150 mV/40 kQ
PHONO overload level
1 kHz, T.H.D. 0.02 % (MM) .........cccesceccsscesserseteessrsecsenee 150 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT
........cccessenceeeseneees 150 mV/1 kQ
Frequency response
PHONO (MM) ........cccccecccsessucesseuseescens 20 Hz to 20 kHz +0.3 dB
CD, TUNER, LINE, TAPE. .........cesccseceeeees 5 Hz to 100 kHz +3 dB*
Tone control (volume control set at —30 dB position)
BASS
sie diicaitaidvevatoeers
ss ovenavananbaivedsudaes eseraenet +8 dB (100 Hz)
TREBLE
-viccsictesccdiviiccatictevvteestovins
ral ee ee eels +8 dB (10 kHz)
Signal-to-Noise ratio (IHF short circuit,
A network)
PHONO (MM, 5 mV input) .........ccsccseeeseccssesseneeeseeeeeseees 89 dB*
CD, TUNER, LINE, TAPE
........::::csscceecceeseeeeesceseeesesnees 108 dB*
Power Supply/Miscellaneous
Power Requirements .............. AC 110 V/120—127 V/220 V/240 V
(Switchable), 50/60 Hz
Power COnsSumtion .........ccccsecsreesecsreetectecscouseescetanseseseces 410 W
AC outlets
Switched (%:2) sis. cicdeccccccccecncvsvacasteaettoecesccvcesvasenenasvonse
200 W
Unswitehed (x1) cies
Giiieaea ted i cacektachiacceeda
reacties 100 W
DIMENSIONS
..........c.cceeesecseeseneees
420 (W) x 347 (D) x 126 (H) mm
Weight (without package)
..........::ccccssssscssseeeeenensenseeeeeneees 6.9 kg
Accessories
Operating INStrUCTIONS .........c.ccecceceseeeeeensececeneesetseseteesteneontenss 1
NOTE:
Specifications and design are subject to possible modifications
without notice, due to improvements.
*Measured with DIRECT switch set to on.
**Measured by Audio Spectrum Analyzer.
***Measured pursuant to the Federal Trade Commission's Trade
Regulation rules on Power Output Claims for Amplifiers.
11
<ARB1433>