Pioneer A-40AE Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer A-40AE. Pioneer A-40AE 24 stron.

Rear Panel



 





1. SIGNAL GND terminal: The ground wire of the turntable

is connected.

2. CONTROL IN/OUT jacks: By connecting Pioneer brand

audio devices, centralized control is possible, for example

you can control other audio devices with this unit's remote

controller. (p12)

3. DIGITAL IN OPTICAL/COAXIAL jacks: Input digital audio

signals from a playback device with a digital optical cable

or digital coaxial cable. (p11)

4. SPEAKERS terminals: Connect speakers with speaker

cables. (Not compatible with connection using banana

plugs or Y plugs.) (p8, 9, 10)

5. AC IN: Connect the supplied power cord. (p13)

6. PHONO MM jack: Analog audio input jacks for connecting

a turntable. (p12)

7. LINE IN jacks: Input audio signals from a playback device

with an analog audio cable. (p11)

8. LINE OUT jacks: Connect a recording device, such as a

cassette tape deck. Connect to the LINE IN jacks on the

recording device using analog audio cable. To select the

input source for recording, use the INPUT SELECTOR

dial on this unit or use the remote controller.

9. P.AMP DIRECT jacks: When using this unit as a power

amplifier, connect the pre-amplifier here. (p13)

0 P.AMP is an abbreviation of POWER AMP.



 

Before use

