Pioneer A-445 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer A-445. Pioneer A-445 37 stron.
Również dla Pioneer A-445: Instrukcja obsługi (13 strony)

Drukuj stronę

CONNECTIONS

See page 3 for Connections.

@ CD player.

@ Adaptor component (graphic equalizer).

@ DAT/Tape decks.

@ Speaker system B (R).

® Speaker system B (L).

@ Speaker system A (L).

Turntable.

@ Tuner

@ To an AC wall socket.

CONNECTING THE SPEAKER CORDS

1. Strip off the vinyl covering and twist the tip of

the wire core.

Twist the wire core.

Loosen the knob and insert the wire core into

the terminal hole.

3. Tighten the knob to fix the wire core in place.

NOTE:

Do not allow the wire core to protrude and touch other terminals or

wires. If the cores of differing wires touch, damage may be caused

to your amplifier and/or speaker systems.

Speaker Impedance

When speaker systems are connected to only the SPEAKERS A or

SPEAKERS 8

terminals,

such

speakers

should

have

rated

impedance in the range of

4-16Q.

When speakers are connected to both the A and B terminals, they

should have a rated impedance in the range of

8- 32Q.

CONNECTING THE INPUT/OUTPUT CORDS

Connect the white plug to the L (left) side, and the red plug to the R

(right) side. Be sure to push the plugs in securely.

Left channel

The INPUT/OUTPUT jacks of this unit are dull tinplated, aiming at

high audio quality.

TO USE THE COMPONENT

CONNECTED

THE ADAPTOR TERMINALS

1. Set the POWER switch to OFF.

2. Remove the two shorting bars from the

adaptor terminals.

White plug

Right channel

Shorting bars.

NOTE:

Remove the shorting bars before connecting an equalizer to these

terminals. Always keep the bars inserted while the terminals are

not in use, and take care not to lose them.