Pioneer GM-2000A Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer GM-2000A. Pioneer GM-2000A 21 stron. Bridgeable power amplifier

Connect the components correctly as shown in the diagram.

Test-connect all components

before securing them into place.

Test-operate your entire car stereo system to ensure that there are

no faulty wiring

connections between this unit and the rest of

your Car stereo system.

The input selector of this amplifier functions automatically.

Therefore, the amplifier may be used with either a Pioneer car

stereo with DIN sockets or a car stereo with RCA pin jacks. For

information about connecting a stereo, see the section entitled

"When combined with a car stereo with DIN sockets" or that

entitled "When combined with a car stereo with RCA pin jacks".

When two channels (stereo) are used, the speakers should have a

minimum

rating of 100 W or more.

When a single channel

(mono) is used, the speaker should have a minimum rating of 200

W or more.

If a speaker whose rating is below that recommend-

ed is used, the speaker may be damaged.

The impedance of the

speakers should be between 2 and 8 ohm.

For detailed information concerning connections between differ-

ent components and this unit consult their respective instruction

manuals and follow those recommendations precisely.

When wiring connecting leads into place secure them with clam-

pers and adhesive electrician's tape. Additionally, to prevent any

damage to the insulative coating of the connecting leads, protect

them with adhesive electrician's tape wherever they may come

into contact with any sharp edges.