Pioneer GM-3500T Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer GM-3500T. Pioneer GM-3500T 14 stron. Bridgeable two-channel power amplifier
Również dla Pioneer GM-3500T: Instrukcja obsługi (37 strony), Instrukcja obsługi (45 strony)
Drukuj stronę
Section
(~c_o_n_n_e_c_t_in~g~t_h_e_u_n_i_ts
____________________________
)GII
About bridged mode
Diagram A - Proper
L<I>
Pioneer
Amplifier
4
Q
Bridged Mode
Diagram B - Improper
2
Q
Bridged Mode
Speaker impedance is max. 4
n,
please carefully
check. Improper connection to the amplifier may
result in malfunction or personal injury due to
burns from overheating.
For bridged mode for a two-channel amplifier,
with a 4
n
load, either wire two 8
n
speakers in
parallel, Left(±) and Right
8
(Diagram A) or use a
single 4
n
speaker. For other amplifiers, please
follow the speaker output connection diagram for
bridging shown on rear: two 8
n
speakers in par-
allel for a 4
n
load or a single 4
n
speaker per
channel.
For any further enquiries, contact your local
authorized Pioneer dealer or customer service.(!]
About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2
n
to 8
n
for stereo connection, or 4
n
to 8
n
for
monaural and other bridge connection.
Subwoofer
Two-channel output
Nominal input:
Min. 60W
One-channel output
Nominal input:
Min.180W
Other than subwoofer
Two-channel output
MAX input:
Min. 120 W
One-channel output
MAX input:
Min. 370W
Connecting the speakers
The speaker output mode can be two-channel
(stereo) or one-channel (mono). Connect the
speaker leads to suit the mode according to
the figures shown below.
1\No-channel output (Stereo)
CD
Speaker (Left)
@ Speaker (Right)
One-channel output
+
CD
Speaker (Mono)(!]
En
CiJ