Pioneer GM-X404 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer GM-X404. Pioneer GM-X404 22 stron. Bridgeable four-channel power amplifier
Również dla Pioneer GM-X404: Instrukcja serwisowa (18 strony), Instrukcja serwisowa (17 strony)

Drukuj stronę

[12] Grommet

[13] Amplifier with RCA input pin jacks

[14] RCA input

[15] Car stereo with RCA output pin jacks

[16] External Output

For details on how to connect to RCA

input jacks A and B, see the

"Connecting the Speakers and Input

wires" section.

If only input pin plug, do not connect

anything to RCA input jack B.

[17] White

[18] Red

[19] Connecting wires with RCA pin plugs

(sold separately)

[20] RCA input pin jack A, B

[21] RCA output pin jacks

[22] Blue

Connect the male terminal of this wire

to the blue wire of the car stereo

(system control terminal). The female

terminal can be connected to the auto-

antenna relay control terminal.

If the car stereo does not have a

system remote control terminal,

connect the male terminal to the power

terminal through the ignition switch.

[23] Speaker output terminal

See the "Connecting the Speakers and

Input wires" section for speaker con-

nection instructions.

Connecting the Power Terminal

• Always use the special red battery power

and ground wire [RD-222], which is sold

separately. Connect the special red

battery power cord directly to the car

battery and the black ground wire to the

car body. (The special red battery power

and ground wire [RD-222] are designed

so that the amplifier can be connected

safely.)

Pass the special red battery wire from the

engine compartment to the interior of the

vehicle.

Fuse

Engine

(30 A)

compart-

ment

Special red

battery wire [RD-222]

(sold separately)

Insert the

After making all

O-ring rubber

other connections

grommet into

at the amplifier,

the vehicle body.

connect the battery

lead terminal of the

amplifier to the

positive (+) terminal

of the battery.

Connect the special red battery wire to the

POWER terminal (+), and the black ground

wire to the GND terminal (–).

POWER

terminal

Interior of

Special red

the vehicle

battery wire [RD-222]

(sold separately)

• Securely fasten the special red battery

Drill an 8-mm

wire and the ground wires with terminal

hole into the

screws.

vehicle body.

Connecting the Speakers and Input

wires

The speaker output mode can be four-

channel, three-channel (stereo + mono) or

two-channel (stereo, mono). To connect the

speaker wires to suit the mode. Connect the

speakers according to figures on following

pages.

Fig. 4

Terminal

screw

Terminal

GND

screw

terminal

Ground wire

(black) [RD-222]

(sold separately)

Fig. 5

Fig. 6