Pioneer PRS-D4200F - Premier Amplifier Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer PRS-D4200F - Premier Amplifier. Pioneer PRS-D4200F - Premier Amplifier 20 stron. Bridgeable four-channel power amplifier
Również dla Pioneer PRS-D4200F - Premier Amplifier: Instrukcja obsługi (50 strony), Instrukcja serwisowa (38 strony)
Drukuj stronę
Before Using This Product
4 Ohm Bridged Mode
2 Ohm Bridged Mode
Diagram B- Improper
R-
Pioneer
Amplifier
L+
I
ACAUTION
I
Diagram A- Proper
• Never replace the fuse with one of greater
value or rating than the original fuse. Use of
an improper fuse could result in overheating
and smoke and could cause damage to the
product and injury including bums.
• Use the supplied hexagonal wrench to tight-
en screws when fastening wires to the termi-
nal. The use of a long, commercially avail-
able hexagonal wrench can cause excessive
torque to be applied possibly resulting in
damage to terminals and wires.
Visit our website
A
CAUTION
Visit us at the following site:
http://www.pioneerelectronics.com
Register your product. We will keep the details of
your purchase on file to help you refer to this
information in the event of an insurance claim
such as loss or theft.
2 Receive updates on the latest products and tech-
nologies.
3 Download owner's manuals, order product cata-
logues, research new products, and much more.
Do NOT install or use your Pioneer ampli-
fier by wiring speakers rated at 4 Ohm (or
lower) in parallel to achieve a 2 Ohm (or
lower) bridged mode (Diagram B).
Amplifier damage, smoke, and overheat-
ing could result from improper bridging.
The amplifier surface could also become
hot to the touch and minor bums could
result.
To properly install or use a bridged mode
for a two-channel amplifier and achieve a
4
Q
load, wire two 8
Q
speakers in parallel
with Left
+
and Right - (Diagram A) or
use a single 4
Q
speaker. For a four-chan-
nel amplifier, follow the speaker output
connection diagram for bridging as shown
on the back of your amplifier, and wire
two 8
Q
speakers in parallel to achieve a 4
Q
load or use a single 4
Q
speaker per
channel.
If you have any questions or concerns,
please contact your local authorized
Pioneer dealer or call Pioneer customer
service.