Pioneer SA-570 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer SA-570. Pioneer SA-570 13 stron.

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. if you think that there is something wrong with this compo-

nent, check out the points below. Sometimes the trouble may fie in another component. Investigate the other components and

electrical appliances being used.

If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center

or your dealer to carry out repair work.

Symptom

Probable Cause

Remedy

No power supplied te unit

ged into another component's power outlet

(e.g. timer, etc.), but power to that unit is

disconnected.

* insert plug securely in outlet.

¢ Turn on power to other component.

No sound

No sound from one

speaker

Can't record tapes

e Connecting cords are disconnected from ter-

minals, or connected incorrectly.

® Terminals or connecting cords' pin plugs are

dirty.

{except when using an adaptor component).

® The function switch selected does not match

the component being played back.

® Operation of other components is mistaken.

® Set the speaker selector switch to "OFF".

® Connect securely.

® Clean terminals and plugs.

* Set switch to OFF.

TAPE 1).

other components.

@ Connecting cords or speaker wires are

disconnected to that side.

° BALANCE control have been adjusted to one

side.

@ Operation of tape deck is mistaken.

e Re-connect properly.

° Consult the operating instructions for the

tape deck.

Can't perform tape

copying

® The positions of the TAPE 1 switch and

ADAPTOR/TAPE 2 switch are mistaken

{when using 2 tape decks).

@ Set switches correctly (see section "Copying

Tapes').

® Consult the operating instructions for the

tape decks.

414