Pioneer SA-708 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer SA-708. Pioneer SA-708 13 stron. Stereo amplifier
Również dla Pioneer SA-708: Instrukcja obsługi (13 strony)
Drukuj stronę
REAR
PANEL
FACILITIES
SA-708/HA model
Opa
i
li
Pig
0 ele
as
t Oe
>
eS SS
—
—a
>
o>
>
- —s
=
@
PHONO INTERFERENCE FILTER SWITCH
This
is used
to attenuate radio-frequency
inter-
ference
from
external
electronic
or
electrical
appliances or products during record play.
@ PHONO JACKS
Connect
the
turntable
output
cords to these
jacks.
@® TUNER JACKS
Connect the tuner cords to these jacks.
4
@
AUX JACKS
These
are auxiliary
input jacks. Connect
a TV
tuner or cartridge tape player to them.
©
SPEAKERS TERMINALS A
Connect
your first pair of speakers to these ter-
minals.
©
SPEAKERS TERMINALS B
Connect
your
second
pair of speakers to these
terminals.
@
AC OUTLETS (HA, S, S/G models)
These
are spare power
outlets. Insert the power
plug on the stereo components (turntable, tuner,
tape deck, etc.) into these outlets.
SWITCHED:
The
power supplied through these
outlets is coupled to the operation of the
amplifier's
power
switch.
The
maximum
power capacity which may be connected to
the two SWITCHED outlets is 100W.
UNSWITCHED:
The
power
is always supplied
through this outlet regardless of the posi-
tion of the power switch. The maximum
power capacity which may be connected
to this outlet is 200W.
NOTES:
@ Never connect an iron ora
toaster to these outlets.
@ Do not get the power outlets and the power plugs
wet or touch them with wet hands, since you may get
an electric shock.
GND TERMINAL
This is the ground terminal. Connect the ground
wire of the turntable, etc. to this terminal.
@ TAPE 1 JACKS
Connect
the
tape
deck
cords to these jacks.
Connect the REC (recording) jacks to the INPUT
jacks on the tape deck, and the PLAY (playback)
jacks to the OUTPUT jacks.
TAPE 2 JACKS
Connect
your
second
tape deck
cords to these
jacks. Connect
the REC
(recording) jacks to the
INPUT
jacks on
the tape deck, and the PLAY
(playback) jacks to the OUTPUT jacks.
@ TAPE 2 JACK (HA, HR models only)
Connect the tape deck to this jack with DIN-type
(recording/playback) cord.
a2 AC INLET (HA, HR models only)
Plug the power cord into this socket.