Pioneer SA-9800 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer SA-9800. Pioneer SA-9800 17 stron.
Drukuj stronę
REAR
PANEL
FACILITIES
SA-9800/S, S/G model
@
PHONO
INTERFERENCE
FILTER SWITCH
This is used to attenuate radio-frequency inter-
ference
from
external
electronic
or electrical
appliances or products during record play.
When this switch is set to ON during record play
with the cartridge
load
resistance
switch is at
1002 position, the sound volume will be reduced,
@ PHONO 1 JACKS
Connect
the
turntable
output
cords to these
jacks.
@) PHONO 2 JACKS
Connect
your second turntable output cords to
these jacks.
@ TUNER JACKS
Connect the tuner cords to these jacks.
@ AUX JACKS
These
are auxiliary
input jacks.
Connect
a TV
tuner or cartridge tape player to them.
@ PREAMPLIFIER/POWER AMPLIFIER
CONNECTOR BAR
When this connector bar is disconnected from the
jacks, you
can
separate
the SA-9800's
pream-
plifier and
power
amplifier.
For
normal
use,
however,
it is connected.
For details on how to
use this
bar, refer to page 14 and "Using PRE
OUT and POWER AMP IN jacks".
NOTE:
If this bar
is not
connected
properly,
you
will not
hear
any
sound
from
the speakers
connected
to the
SPEAKERS terminals.
@ SPEAKERS TERMINALS
A
Connect your first pair of speakers to these ter-
minals.
SA-9800/HG model
SPEAKERS TERMINALS B
Connect
your second
pair of speakers to these
terminals.
@ GND TERMINALS
These
are
the
ground
terminals.
Connect
the
ground
wire
of the turntable, etc. to these ter-
minals.
@@ TAPE 1 JACKS
Connect
the
tape
deck
cords
to these jacks.
Connect the REC (recording) jacks to the INPUT
jacks on the tape deck, and the PLAY (playback)
jacks to the OUTPUT jacks.
@) TAPE 2 JACKS
Connect
your second
tape deck cords to these
jacks.
42 AC OUTLETS (S, S/G models only)
These are spare power outlets. Insert the power
plug on the stereo components (turntable, tuner,
tape deck, etc.) into these outlets.
SWITCHED:
The power supplied through these
outlets is coupled
to the operation of the
amplifier's
power
switch,
The
maximum
power capacity which may be connected to
the two SWITCHED outlets is 200W.
UNSWITCHED:
The
power
is always supplied
through these two outlets regardless of the
position of the power switch. The maximum
power capacity which may be connected to
these two outlets is 200W.
NOTES:
e@ Never connect an iron or a toaster to these outlets,
e@ Do
not get the power
outlets and the power plugs
wet or touch them with wet hands, since you may get
an electric shock,
43 TAPE
2 JACK
(HG model only)
Connect the tape deck to this jack with DIN-type
(recording
/play back) cord.
4