Pioneer SX-980 Instrukcja obsługi - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer SX-980. Pioneer SX-980 22 stron. Am/fm stereo receiver
Również dla Pioneer SX-980: Instrukcja obsługi (28 strony)
Drukuj stronę
TAPE
DECK
OPERATIONS
PLAYBACK
Proceed as follows when playing back pre-recorded
music
tapes
available
on
the open
market,
and
tapes on which you have recorded programs:
1. As shown in Fig. 18, set the TAPE MONITOR
switch 1 to ON if the tape deck is connected to
the TAPE
1 jacks. Set the TAPE
MONITOR
switch 2 to ON if it is connected to the TAPE 2
jacks.
2. Operate the tape deck controls for playback.
8. Adjust the volume with the VOLUME control.
4. To adjust the tone, first set the TONE switch to
ON, and then adjust the BASS
and TREBLE
controls for the preferred bass and treble levels.
NOTES:
1. Always
return
the
TAPE
MONITOR
switch
to the
upper position
(OFF)
when you are not playing back
a tape.
2. As long as the TAPE MONITOR
switch I or 2 is at ON,
you
will be able to play back a tape regardless of the
setting of the function buttons.
oY
(an
Wy
Wi
sense
Tape deck 1
ee
aS
too
Tape deck 2
Speaker systems
Fig. 18
RECORDING
1. Press the function
button that corresponds to
the program source which you intend to record
(for example, a record off a turntable or an FM
broadcast).
2. Set
the
DUPLICATE
switch
to
OFF
(upper
position).
3. Play the selected program source.
4. Operate the tape deck controls and start record-
ing.
ried
. When
recording,
keep
the MODE
switch at STEREO.
Bi Adjust the recording level with the tape deck's record-
ing level controls.
3. The receiver's VOLUME,
BASS and TREBLE controls
have no affect on the recorded sound when a recording
is being made.
Program source
i
Tape deck
AUX
TT
cy
tO O00 O00 bee ar
AUX PHONO 2/MIC PHONO 4
00000
Fig. 19
Tape monitoring
If a recording is being made on a 3-head tape deck,
the recorded sound can be monitored through the
speaker systems if the TAPE MONITOR
switch 1
or 2 is set to ON. In this case, both recording and
playback connections must be made.
NOTE:
If you have a 2-head open-reel deck or cassette deck, you
will not be able to monitor
the recorded
sound even
if
you
set the TAPE
MONITOR
switch
to ON. However,
you
will be able to hear the sound at the playback end
(program source).
TAPE
DUPLICATE
MONITOR
ON
ON
ON
Fig. 20
Duplicating and editing recorded tapes
If you have two tape decks, a recording of, say, a
complete
FM
broadcast
can
be made
and then
those
items
that you
want
for your
permanent
'tape library' can be selected and re-recorded onto
another tape. It is also possible to duplicate tapes
from an open-reel tape deck onto a cassette tape
deck.
1. As shown in Fig. 21, connect the tape decks to
°
the receiver's TAPE 1 and TAPE 2 jacks.
2. Set the DUPLICATE switch to ON.
3. Play back the recorded lad on tape deck land
°
record it on tape deck 2. It is aiso possible to
play the tape back on tape deck 2 and record it
on tape deck 1.
4, Set the TAPE MONITOR
switch 1 or 2 to ON
when you want to monitor the recorded sound.
e Do
not set both tape decks
to the recording
mode at the same time.
16