Pioneer CDJ-800MK2 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer CDJ-800MK2. Pioneer CDJ-800MK2 24 stron. Compact disc player
Również dla Pioneer CDJ-800MK2: Instrukcja serwisowa (4 strony)

Drukuj stronę

AUTO BEAT

LOOP 1,2,4,8

LOOP IN

REALTIME

CUE

REV

LOOP OUT

(OUT ADJUST)

RELOOP/EXIT

1, ¡

CUE

PLAY/PAUSE

Jog dial

7 To create an automatic loop based on the track's

BPM (AUTO BEAT LOOP)

During playback or pause, press one of the AUTO BEAT LOOP

buttons (1, 2, 4 or 8).

¶ The pressed button will flash, the loop out point will be automati-

cally set based on the track's BPM, and loop play will begin.

¶ When AUTO BEAT LOOP 1 button is pressed, the loop-out point

is set one beat after the instant the button is pressed.

¶ When AUTO BEAT LOOP 2 button is pressed, the loop-out point

is set two beats after the instant the button is pressed.

¶ When AUTO BEAT LOOP 4 button is pressed, the loop-out point

is set four beats after the instant the button is pressed.

¶ When AUTO BEAT LOOP 8 button is pressed, the loop-out point

is set eight beats after the instant the button is pressed.

¶ After an auto beat loop has been set, if one of the AUTO BEAT

LOOP buttons (1, 2, 4, or 8) is pressed again, a new loop play will

begin using the previously set loop-in point, with a new loop out

point automatically set based on the track's BPM.

During playback, if you press one of the AUTO BEAT LOOP

buttons while holding the LOOP IN/REALTIME CUE button

depressed, the following operations will be performed:

¶ When AUTO BEAT LOOP 1 (1/8) button is pressed: 1/8 loop.

¶ When AUTO BEAT LOOP 2 (1/4) button is pressed: 1/4 loop.

¶ When AUTO BEAT LOOP 4 (1/2) button is pressed: 1/2 loop.

¶ When AUTO BEAT LOOP 8 (1/1) button is pressed, 1/1 loop.

¶ When the RELOOP/EXIT button is pressed, loop play is canceled

and the previous loop mode (auto/manual) is restored.

7 To cancel a loop

During loop playback, press the RELOOP/EXIT button.

¶ When the playback reaches the loop-out point, it will continue nor-

mally, without returning to the loop-in point.

7 To change a loop-out point

1. During loop play, press the LOOP OUT (OUT ADJUST)

button.

¶ The display will show the out-point time; the LOOP OUT button

will change to quick flashing, while the LOOP IN/REALTIME CUE

button light will go out.

2. Press the SEARCH button (1, ¡) or rotate the jog dial.

¶ The loop-out point will change in one-frame increments.

¶ The loop-out point cannot be moved to a position before the loop-

in point.

¶ In the case of MP3, adjustment of loop positions is possible only

within the same track where cue points are set.

¶ Loop-out point cannot be modified during scratch play.

¶ When the LOOP OUT button is pressed or 30 seconds elapses,

the adjustment mode is canceled and loop play resumes.

* If the loop out-point adjust mode is selected while AUTO BEAT LOOP

8 (1/1) button is lighted, the AUTO BEAT LOOP 8 (1/1) button will

flash and the modified loop-out point will be updated in memory. If the

loop out-point adjust mode is selected while AUTO BEAT LOOP 4, 2

or 1 button is lighted, the loop-out point can be adjusted, but it will not

be updated in memory. If the AUTO BEAT LOOP button is pressed

here to shorten the loop, the playback will revert to 1/8, 1/4, 1/2 or

1/1 loop based on the original loop created before the modification,

when the AUTO BEAT LOOP 8 (1/1) button was lighted.

7 To return to a loop (Reloop)

During playback after leaving a loop, press the RELOOP/EXIT

button.

¶ Playback will return to the loop-in point of the previously set loop, and

loop play will resume.

¶ If auto beat loop has been set, loop play will resume in auto beat loop

mode.

¶ In the case of MP3 playback, reloop cannot be performed to a folder

different from the one currently selected.

Reverse play

Press the REV button. The button indicator will light.

Playback will begin in the reverse direction.

¶ Playback acceleration/deceleration produced with jog dial rotation will

operate in reverse.

¶ Reloop cannot be performed during reverse playback.

¶ Seamless reverse playback cannot be performed with loops of 15

seconds or more.

¶ If track search or loop play are performed, the audio memory status

indicator (jog dial display) will flash for 1 to 2 seconds, and scratch/

reverse operations may be temporarily disabled.

¶ In the case of MP3, reverse play that overlaps multiple folders is not

possible.

¶ During MP3 play, reverse playback may not occur immediately with

some tracks. (The message [Searching] may appear on the display

while play time information is read into the unit before playback starts.)

About fader start play

When the accessory control cord is used to connect this unit's CONTROL

jack to the corresponding CONTROL jack on a Pioneer DJ mixer, moving

the mixer's channel fader causes the CUE standby on the CD player to be

released, thus instantly starting playback. The mixer's cross fader can also

be used to control fader start on the player. Also, when the fader lever is

returned to its original position, the player can be made to return to its cue

point (back cue). For details regarding connection, P. 8.

Advanced Operations