Pioneer CDJ-800MK2 Instrukcja obsługi - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer CDJ-800MK2. Pioneer CDJ-800MK2 24 stron. Compact disc player
Również dla Pioneer CDJ-800MK2: Instrukcja serwisowa (4 strony)

Pioneer CDJ-800MK2 Instrukcja obsługi
Troubleshooting (Error message display)

Error message display

When the unit is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the
following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the
table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer
Service Station or contact the store from which you purchased your player for assistance.
Error code
Error type
E–72 01
TOC READ ERROR
E–83 01
PLAYER ERROR
E–83 02
E–83 03
E-83 04
MP3 DECODER ERROR
E-83 05
DATA FORMAT ERROR
E–91 01
MECHANICAL TIME OUT
22
Error content
Can't read TOC data.
Can't play this disc properly.
Can't play this disc properly.
Mechanical operation did not end within
specified time.
Cause and remedy
Disc is cracked.
= Replace disc.
Disc is dirty.
= Clean disc.
If other discs operate normally, problem is with
this disc.
Does not conform to MP3 format.
= Change to disc conforming to MP3 format.
Foreign object in disc loading slot.
= Remove foreign object.